Tag Archives: manufacturing

7 Of The Best Sounding Car Exhausts

We asked our friends at Hagerty what defines a great sounding automotive engine. Here’s what they had to say.

When executed just right, a proper exhaust is the cherry on top of the perfect automotive sundae—it stands out in its own right, but it also completes the package. And it’s not just the sound, glorious though it may be. The visual—and sometimes the artistry—that a good set of pipes can add sometimes does more to define a car than any bit of thoughtfully penned bodywork.

We got to thinking about the sights and sounds that captivate us most, and this list was the result. We could have gone on for days, though, and we bet you have some favorites, too, so give our submissions a read, then tell us your favorite exhaust—for whatever reasons you choose—in the comments!

Ford GT40

I’m going to go with the Ford GT40’s “bundle of snakes” exhaust. When you stop to consider the precision with which such a system had to be fabricated, your mind kind of melts a bit. If you’ve never YouTubed one of these things at full honk, do yourself a favor and click play below. — Nate Petroelje

https://youtube.com/watch?v=iMocr95cYfU%3Fsi%3DSRXSg-GEQNSI5Tcf%26enablejsapi%3D1

Gurney Eagle

Dan Gurney Eagle-Weslake T1G Grand Prix Of Great Britain 1968
Dan Gurney, Eagle-Weslake T1G, Grand Prix of Great Britain, Silverstone, 20 July 1968.Bernard Cahier/Getty Images

The first time I ever saw a Gurney Eagle was at Gooding’s Pebble Beach auction in 2013.

The car was on display in the lobby area of the tent, and I remember being flabbergasted at the intricacies of the exhaust pipes coming out of that Gurney-Weslake V-12. I’d never seen anything like it, and all I could think of was spaghetti twirled up on a fork. — Stefan Lombard

1966 AAR Gurney Eagle Mk I-1
Stefan Lombard

Outlaw Dirt Sprint Car

Outlaw Dirt Track Sprint Cars race action
Cameron Neveu

No question, there are some lovely-to-look-at exhausts here, but I’m more moved by the sound an engine makes through that exhaust, and that’s a tough call. On several occasions I’ve been lucky enough to be at a racetrack when vintage Ferrari Formula 1 cars were making an exhibition run, and the Ferrari 412 T2’s fabric-tearing sound from its 3.0-liter V-12 is just otherworldly. But I’m picking something far less sophisticated: An exhaust note made by simple unmuffled headers fed by a 410-cubic-inch V-8 engine in an outlaw dirt sprint car. One car is loud; 24 sprint cars, representing about 21,600 horsepower, is thunder. The biggest sanctioning body for sprint cars is the World of Outlaws, which runs about 90 races a year, in a season that, in 2024, starts on February 7 and ends on November 9.

Due to local zoning laws, the WoO requires mufflers for 22 of the races. Since my hearing is shot already (Kids! Don’t do drugs, but DO wear earplugs!), I’ll take the unmuffled races, and the unmistakable smell of methanol in the evening. — Steven Cole Smith

Drag Headers

2021 Dream Cruise woodward ave action hot rod
Cameron Neveu

The best exhaust systems are the ones that end after the headers.

I couldn’t have said it much better than SCS. A 410 engine belching out of unmuffled Schoenfeld headers is tops.

But a close second are drag headers. Zoomies or fenderwell are my favorite on old drag cars. That cackle. That’s the noise I’d like to hear out of the trumpets as I approach heaven’s gate. Oh, and the visual appearance of four pipes directing exhaust up and over fat slicks, or peaking around the lip of a fender. Get outta here! — Cameron Neveu

Milan Nostalgia Drags Willys Truck Gasser
“The Haymaker” Willys gasser.Cameron Neveu

Mercedes SLR McLaren and 1987–93 Mustang LX

Mercedes-Benz SLR McLaren exhaust
Mercedes Benz

My favorite exhaust in terms of looks is the side exit exhaust of the 2003–10 Mercedes SLR McLaren, because of that insane amount of space between the front wheel and the cowl and the subtle little twin pipes peeking under that area. The flat belly pan likely made this a mandatory location, but that only adds to the appeal. But when it comes to looks and sounds, for me there’s nothing like a 1987-93 Mustang LX with its signature chrome double-barreled shotgun tailpipes, and that small block Ford rumble. I could look and listen to that exhaust all day. — Sajeev Mehta

1990 ford mustang LX exhaust
Ford

Shelby Mustang GT350

1966 Ford Mustang Shelby GT 350
Ford

I grew up on V-8s in a GM family.

That said, the first time I heard the idle and subsequent roar of a 289 in an early Shelby GT350, I knew Ford had done something right.

It wasn’t till I was older that I learned all about how firing order, crank design, and exhaust setup influenced the amazing sounds that come from our favorite engines. That 289 was what I remember as my earliest favorite so that’s what I picked for this response, but like Steven Cole Smith said, there are so many great sounds out there that it’s a really tough call. Eddy Eckart

Why Radiation Protection Makes Sense- even at ‘Low’ Exposure levels

Geiger CounterRadiation is all around us.

  It occurs naturally in our environment, coming to us from the sun, from the soil and foods that we eat, and in the air that we breathe. It is omnipresent across a diverse cross section of industries. We tend to associate radiation with the nuclear industry, but the reality is that we come across radiation sources in numerous other areas:  construction, health care, oil and gas, research, manufacturing, food processing – to name just a few.

With radiation being everywhere in our lives, it is not surprising that it garners a lot of attention, curiosity and, often, worry.

With more than 15 years as a career radiation protection professional, I’ve had to respond to many occupational radiation safety questions — some have related to regulations and compliance, others to potential health effects of exposure and ways to minimize such exposure. In all cases, it is best to rely on well established radiation physics concepts and scientific data, where available.

While there is not much that we can do to escape natural background radiation exposure, we do want to avoid any unnecessary exposure to high levels of radiation, such as the potential hazard due to elevated radon (a radioactive gas) in our homes and workplaces.

How to Protect Yourself From Harmful Mobile Cell Phone RF-EMF Radiation -  TurboFuture

Radon testing of homes is the simplest first step you can take to protect yourself and your family from radon gas, but all too often we do not make the time to educate ourselves and make this a priority. Workplaces are required to have a radiation protection program in place that is appropriate for the type of radiation and potential risk in their industry. But it takes time and investment to develop these programs, and it requires the commitment of both employers and workers to put these programs into practice.

Our challenge is that radiation and its associated risks are not always well understood.

On the one hand, we do not wish to alarm anyone unnecessarily, yet we want to make sure that the public, workers and employers are aware of the steps they need to take to stay safe.  Remember, we are talking about an “invisible” hazard that very rarely causes ill health effects in the short-term. Additionally, the existing radiation protection models are built on what we call the linear no-threshold concept, which, in simple terms, is based on studies of the atomic bomb survivors from the Second World War in Japan and other high-exposure situations, and extrapolates the information to the potential health effects of low exposures.

Low Levels Radiation

An agency of the World Health Organization (WHO) recently published a study on the health effects of low-level exposure to radiation that provides data to support the validity of the linear no-threshold model. We encourage all who read the study (available at The Lancet Haematology) to not get alarmed and to keep the study conclusions in perspective.

It suggests that extended exposure to low level of radiation increases the risk of developing leukemia.

A frightening statement, but we have to keep in mind that the increased risk is small, in line with what we have estimated based on the modeling concepts. This boils down to two things: first, it is important that we continue to apply the ALARA principle — “As Low as Reasonably Achievable” — to all our of interactions with radiation; and second, that we continue to view the numbers associated with radiation and risk in the proper context. The study points to a “small increase” of risk of dying from cancer from low levels of radiation exposure.

Let’s put this into perspective. 

If we extrapolate this study’s conclusions for nuclear workers to persons living near Canadian nuclear plants, people are 6,000 times more likely to die in a car accident, than to die from leukemia due to doses received from reactor plant emissions. Yet most of us think nothing of driving to work, driving our kids to school, or driving to visit friends and family.  The radiation risk is there, but it is significantly smaller than the risks we accept every day, often without even thinking or worrying about them.

More research is required on the health risks from low-level radiation exposure, and there are efforts underway around the world to make it happen. At the Radiation Safety Institute, we will be looking forward to hearing about more study results.  In the meantime we invite all people who are interested in the subject of radiation safety, who have a question or a concern, to reach out to our Free Information Service at 1-800-263-5803 or by e-mail at info@radiationsafety.ca. Let’s keep the conversation going.  For the Silo, Laura Boksman Chief Scientist at the Radiation Institute of Canada.

Click to view on I-tunes
Click to view on I-tunes

2022 And NOT Another Year Closer To Private company Asteroid Mining

It’s been eight years since an historic landing took place between an European Space Agency drone and a comet.(which looked suspiciously a lot like an asteroid to us!)

At that time a report from Deep Space Industries laid out their business plans up to 2020 and what they had committed to  sounded more like science fiction than fact.

But it wasn’t and they’d already secured investors.

A 2019 announcement from NASA stating that it would be the National Space Administration in the lead instead ( NASA will soon begin hunting a nickel laden asteroid ) spoke volumes about not only the possibility of asteroid prospecting- but also to its inevitability in the private sector.

DSI concept of “coming soon” asteroid mining.

And yet, things have changed…..again.

In early 2020 Deep Space Industries (along with the only other asteroid mining company, Planetary Resources) were purchased by Bradford Space Group and ConsenSys Group respectively and all plans for private asteroid mining were shelved indefinitely. Deep Space Industries is now focused on developing space propulsion systems and ConsenSys is now focused on developing blockchain  security applications for space technology. 

What could have been- Deep Space Industries ambitious plan before the take over

Their plan was to send an entire fleet of prospector spaceships to Near-Earth asteroids in order to harvest them for precious metals and other undisclosed resources. (space rubies anyone?). Starting in 2015, Deep Space Industries were to begin their operation by sending three small spacecraft called FireFlies to selected asteroids near earth for sample taking and photo reconnaissance. One year later, bigger craft called DragonFlies were to leave on four year missions to retrieve asteroid samples and bring them back to Earth. An ambitious project to be sure and not surprisingly, the timeline had been regularly pushed back.

dsi timeline mission planning

This press release from DSI said a precursor mission was scheduled to launch in 2017: “Recently, Deep Space Industries and its partner, the government of Luxembourg, announced plans to build and fly Prospector-X™, an experimental mission to low-Earth orbit that will test key technologies needed for low-cost exploration spacecraft. This precursor mission is scheduled to launch in 2017. Then, before the end of this decade, Prospector-1 will travel beyond Earth’s orbit to begin the first space mining exploration mission.”

daniel faber ceo deep space industries

Valuable materials exist in abundance in space and have strong economic potential. Using their tested indicators as investment attractors, Deep Space will move towards securing a commercial space operation and start into the next phase of its business plan. This involves concentrating firstly on processing rocket fuel from asteroid-harvested water.

This fuel, harvested and processed in space will save millions of dollars, since existing communications satellites will no longer be ‘thrown away’ when their fuel supply has been used up. (Satellites that can longer ‘move’ and stay in orbit by using their rocket engines are left to slowly fall towards earth and burn up in the atmosphere ).

Deep Space Industries past-CEO David Gump estimated that a satellite ‘refueled’ and saved from burn up is worth up to $8,000,000 per month. Those figures start to add up when you factor in the number of satellites in use and being launched every year. Another plan during this phase of their business operations is to return precious group metals such as platinum and gold back to earth.

After all, if you’re splitting up asteroids and discover metal commodities, why not bring it back down to earth?

Deep Space believed that other metals harvested from asteroids also have an in-orbit value. They are developing the Microgravity Foundry- a type of 3D printer that will be used to fabricate and machine metal parts in space from pure asteroid metal such as high strength nickel parts.

Deep Space cgi mockup of their planned 3D space printer.
Deep Space cgi mockup of their planned 3D space printer.

Since this factory will operate in space and in zero gravity and produce parts in space, the idea of permanent space development and human habitation is economically feasible. Stephen Covey co-founder of Deep Space Industries and inventor of the Microgravity Foundry process: “What’s cool about the [3D] printer is that it can take its own parts, grind them up, and recycle them into new parts.”

Stephen Covey- inventor of the Microgravity Foundry process
Stephen Covey- inventor of the Microgravity Foundry process

Deep Space Industries past-CEO David Gump: “Using resources harvested in space is the only way to afford permanent space development. More than 900 new asteroids that pass near Earth are discovered every year. They can be like the Iron Range of Minnesota was for the Detroit car industry last century- a key resource located near where it is needed. In this case, metals and fuel from asteroids can expand the in-space industries of this century. That is our strategy.” Company estimates place a value of 1 ton of raw asteroid material at a worth of $1,000,000 [usd] in orbit.

Buy outs over the last few years have all but ended the dream and it will be the various space agencies such as NASA and ESA that will fulfill Deep Space Industries abandoned plan. For the Silo, Jarrod Barker.

Supplemental: http://www.businessinsider.com/deep-space-industries-asteroid-mining-plans-2013-1#ixzz2Io8Qg8uc

Updates: Deep Space Industries aligns with Luxembourg Government, applauds space commercialization policy.

Mexican commercial space company MXSpace partners with Deep Space Industries.

NASA hunting nickel 16 Psyche asteroid worth quadrillions of dollars.

How The Old iPhone5 Was Made & Why It Still Matters

Courtesy of Silo tech writer Alex Hillsberg
Courtesy of Silo tech writer Alex Hillsberg

The Silo's new Sci-tech writer Mr. Alex Hillsberg
The Silo’s new Sci-tech writer Mr. Alex Hillsberg

Fashion And Technology Connect At New York Fashion Week

What would it be like to listen in on a discussion on new materials/textiles by a director at NASA, an entrepreneur focusing on branding for dogs and an international superstar in fashion? It may sound odd at first thought, however, in the fashion industry today everyone is linked through technology – which nowadays is every brand’s biggest competitor.

Marcelo & Jordana Guimaraes (husband and wife) are the founders of FASHINNOVATION – an event bringing the thought leaders in the fashion and technology industries in front of an audience to discuss topics including production/manufacturing, sustainability, textiles/technology, branding/design, e-commerce, celebrities in fashion and “fashion-tech on the rise”(startups). These conversations will take place in moderated panels sharing a common goal: to spark the entrepreneurial mindset through inspiration and knowledge.

FASHINNOVATION New York Flyer

FASHINNOVATION will take place during New York Fashion Week on September 12th, 2018.
“I’ve been involved in the entrepreneurial eco-system throughout my life – always with a focus on technology. The challenge with the fashion and technology industries, is having them always inter connected to have a finger on the pulse of the latest innovations – making things exciting and thought provoking. With the merge of ideas, the outcome is unimaginable” says Founder, Marcelo Guimaraes.

A look back at an earlier NYC Fashion week show-

Confirmed to participate are: Vice President of Shopify/Co-Founder of Shopify Plus – Loren Padelford, Co-Founder of Ministry of Supply – Gihan Amarasiriwardena, Global Fashion Industry Leader & Partner at IBM – Karl Haller, Best-Selling Author & Host of TV Show: Elevator Pitch – David Meltzer, Designer/Founder at Kris Harring – Kris Harrington, Co-Founder of Bolt Threads – David Breslauer, Fashion Designer (Project Runway season 11 & All Stars) – Layana Aguilar, Art Creative for MAC make-up & Fenti by Rihanna – Jason Naylor, Founders of HICKIES (collaboration w/ DVF) – Mariquel Waingarten & Gaston Frydlewski, Co-Founder of M.Gemi – Ben Fischman, Executive Director at FIT’s Infor Design and Tech Lab – Michael Ferraro, Co-Founder of Universal Standard – Alexandra Waldman, Founders of Haerfest – Tim & Dan Joo, Founder of ByBorre (NIKE & Louis Vuitton collabs)– Borre Akkersdijk, Founder of Zee Dog – Thadeu Diz, Co-Founder of WindowsWear – Jon Harari, Program Executive at NASA – Jenn Gustetic and Founder of Fashion Tech Consortium – Michael Reidbord. Institutions in participation include Singularity University (NYC Chapter) and Endeavor. Part of all proceeds will be donated to NFTE.

“It’s exciting to see the positive feedback on FASHINNOVATION from leaders in the fashion and tech industries. We have additional confirmations on the way ranging from fashion personalities to platinum record superstars – the eclectic mix of people and companies participating, will ensure that everyone who attends walks away with knowledge that is unmatched” says Co-Founder & PR Director Jordana Guimaraes.

The event will resume with a cocktail networking reception, with live performances by: “violin superstar” who’s performed w/ Beyonce, etc. – Ezinma and singer/songwriter Heather LaRose – recently hitting 1 million streams online & best known for her song “New Moon” featured on MTV’s “Teen Wolf”.

Canada Was Being Transformed Due To Stephen Harper’s Government

MacLean’s columnist, Paul Wells, wrote a book on Prime Minister Stephen Harper entitled “The longer I’m Prime Minister: Stephen Harper and Canada 2006 –“.  In this book, the author warns that as the years pass with Harper in office, Canada is being radically transformed.

The Longer Im In Power Book Excerpt

Truthfully, Canada is being transformed because of Stephen Harper’s government in Ottawa  – just not in the way that Paul Wells anticipated it would be.  Wells pictured our federal government being fashioned into a reflection of a Reagan-esque Washington, where an enduring small-c government will be his legacy.

If Wells is right and that was Harper’s goal, then he hasn’t accomplished it.  Canada’s Economic Action Plan was one of this country’s largest ever public spending policies and Harper’s government has run deficits each year in office, except for the last budget.

But Stephen Harper has changed Canada, and in at least one case irreparably, because of his influence on Provincial politics.

Stephen Harper

Over the course of the past 50 years, provincial leaders have postured during campaigns that Ottawa has been unfair to their province.  Trudeau’s National Energy Policy was pure gold to the Alberta PC’s led by Peter Lougheed.  Anti Liberal sentiment has endured and kept the PC’s in power for more than a generation after Trudeau left office.

Canadian voters inherently understand the need for checks and balances by electing a strong Premier who promises to guard against the power of the federal government.

The trend in Ontario is if the Prime Minister is a Liberal, then the Premier will be a PC – and vice versa.  This trend has been going on for generations.

In reaction to Stephen Harper being Prime Minister, Ontarians have sleep-walked into re-electing Liberals who have put in place policies that have devastated the Ontario economy.  Seven years have passed since the great recession and Ontario shows scant few signs of recovery.  The crown jewel of the Ontario economy, it’s manufacturing sector, has left Ontario after years of artificially high energy costs and unnecessary red tape.  Local economies once buttressed by auto manufacturing are left reeling under Kathleen Wynne’s government.

The longer that Stephen Harper remains Prime Minister, the deeper the chasm for Ontarians created under provincial Liberal mismanagement.  With public debt loads skyrocketing, it will soon be impossible for the next generation to find its footing after a decade of reckless waste.

What is going on in Ontario today under the ardently left wing government of Kathleen Wynne should be a splash of cold water in the faces of Albertans who recently voted to give a majority mandate to the NDP.

Alberta had 42 years of provincial PC power.  During that time, they saw four conservative Prime Ministers, Joe Clark, Brian Mulroney, Kim Campbell, and Stephen Harper.  (Clark and Campbell held power for only a few months and they had little impact on provincial politics.)

When Mulroney won his massive majority by piecing together a winning coalition of conservative voters in Alberta and Quebec, his government elicited a jarring reaction from Alberta voters.  Rather than change the provincial government, Albertans birthed a new federal party, the Reform Party, and booted all of the federal PC’s out of the province in the next election.

And the provincial vs. federal dynamic played a role in last night’s Alberta election results.  A former high ranking cabinet minister in the Harper government, Jim Prentice was soundly rejected by voters, ending the PC dynasty as the party moves from first to third in the provincial legislature.  Simply put, Jim Prentice was too close to Stephen Harper.  And when Alberta’s only sound opposition, former Wildrose leader Danielle Smith,  shocked her party to join Prentice in an attempt to “strengthen forces” we saw the idea backfire magnificently in last night’s results with a crushing Orange wave.  Alberta voters did not trust Prentice to provide the checks and balances that will see the province through the economic crisis brought on by low oil prices.

Does an Alberta Orange Wave mean that Stephen Harper’s support in Alberta is waning?  Will we see prominent cabinet ministers defeated on October 19th?

Anti-Harperites might think so but there really isn’t a chance the CPC will lose seats in Alberta this time around.

Alberta has an Albertan Prime Minister.  Many of the most powerful cabinet ministers are also Albertan.  When Harper retires, his successor will likely also be an Albertan.

Alberta voters have people in Ottawa that they know they can count on.

On the other hand, the two other federal options can be easily discounted.  Mulcair and Trudeau are both from Montreal and each have a checkered history with Alberta oil interests.

Rather than change the Prime Minister, Alberta voters decided that they will change the provincial government instead .

Checks and balances will be restored in the voter’s minds. For the Silo, Maddie Di Muccio.

Click me!
Click me!

ABOUT MADDIE:

A former municipal town councillor in Newmarket, Ontario, Di Muccio often appears as a political pundit in the media and her freelance columns in the Toronto Sun discuss political issues across Canada. She currently serves as President of York Region Taxpayer’s Coalition and President of the Society for Quality Education.

World’s First Colour 3D Printer Set To Enter Every Home And Business

New York City, US – Global Release.  Last month, botObjects began taking advanced orders on the world’s first Full Color 3D Desktop Printer – at aggressive prices aimed at enabling most customers from home users, business professionals to educational institutions the opportunity to buy the ProDesk3D.
Why the finger of God? (courtesy of Michelangelo's Creation of Adam fresco 1508-12) Because this 3d printer and those like it are GAME CHANGERS. We all will have unbelievable powers of creation. Sure right now, there's an over-run of plastic Yoda heads and bubble-gum machine toys but eventually the novelty will wear off and the real output will begin. There are likely new home-based manufacturing businesses that will spring up as 3d printer prices fall and their capacities and features rise. Here's a freebie- how about manufacturing fishing lure bodies from your desktop? CP

While some observers pegged the launch price at $3000 or more, the firm decided to launch an early order price at $2,849 for the standard edition – hoping to make it an easier decision for customers as it is highly competitive with its contemporaries, yet significantly more advanced, and in a more mature stunning case. [ To keep things in historical perspective- “The first laser printer success was the Hewlett-Packard (HP) LaserJet, released in 1984. The HP LaserJet bacame the de facto standard for the personal computer industry. By 1987, HP and clone laser printers could be purchased for about $2,500 and 2005 prices were under $1,000. ” Xerox Corporation u-s-history.com CP ]

The company also recently announced its next generation website, and along with it, released significant information that future customers wanted, such as 3D full color print samples created on the ProDesk3D.  botObjects aims to show how advanced the ProDesk3D is, with color 3D printed samples never seen before in the 3D Desktop Printing category.  Also, the firm announced technical information about the ProDesk3D, confirming an advanced specification aimed at delivering the first real 3D desktop printer for the mass market – with features aimed to deliver higher quality with color range, all-round ease of use, and printing speed.  The firm also confirmed that the ProDesk3D will print at 25 microns – some 4 times more accurate than its competitors, and at a maximum speed of 175mm per second – delivering industry leading speed for an FDM 3D Desktop Printer.

 

Martin Warner, CEO & Co-founder said, “We are delighted to be ahead of our plan, and release information that customers want to see, such as our own 3D print samples, so they can see the quality of finish and the gorgeous color range in the samples.  We also released the technical specification, the available price and much more.  Now customers can order today!”

botObjects [ and The Silo btw CP ]  believes that the 3D Desktop Printing revolution, is the next great technology wave, much like the PC revolution, and will no doubt dramatically change the rate of innovation at home and in the workplace, while influencing the approach to education both in school and in industry.  Areas such as product design, rapid proto-typing, many forms of engineering, architecture, precision-based manufacturing, home utility replacement, gaming & art and much more will dramatically change as a result of 3D Desktop Printers.  As software becomes easier for people to create 3D models, the ProDesk3D aims to make this a reality, announcing its own easy-to-use ProModel Software, coupled with the ProDesk3D to enable customers to create the models of their choice very quickly and efficiently.

Examples of full colour 3d printed BotObjects. To make real consumer and home inroads- practical objects at reasonable prices will need to happen, but these are a pretty cool start. CP
Examples of full colour 3d printed BotObjects. To make real consumer and home inroads- practical objects at reasonable prices will need to happen, but these are a pretty cool start. CP

Speaking on the announcement, Mike Duma, CTO & Co-founder said, “We know that people are extremely excited about the ProDesk3D, and we thank everyone for their patience.  We have had over 100,000 enquiries, and numerous countries interested in distributing the ProDesk3D.  We have announced a great deal of information so that our customers can learn more and evaluate whether to purchase the ProDesk3D.  We also added something special – our new limited edition ProDesk3D Blue – we know that customers will love this design just like the ProDesk3D.”

botObjects announced it can now take early orders by telephone today, and expects to take early orders on its website soon. [ now happening at   http://botobjects.com/ CP ] The firm confirmed that the first early order batch expect to ship 1st October 2013.

 

Supplemental- The CAD/CAM lab at UC Berkeley http://ced.berkeley.edu/resources/cadcam-lab/

The History of Computer Printers http://inventors.about.com/library/inventors/blcomputer_printers.htm

Moedls app turns smartphones into inexpensive 3D scanners http://www.3ders.org/articles/20130225-moedls-app-turns-your-smartphone-into-a-3d-scanner.html