Popcorn ceilings are a well-known finish that resembles a bubble-like textured surface. They were trendy from the late 1960s to the mid-1990s. This is why homeowners who have had difficulty removing carpet and green tiles in the kitchen now want stucco removal.
Steps to Remove Popcorn Ceilings
The most effective way to remove a textured popcorn ceiling is to use a large paint scraper. However, if you do not follow the correct procedure and do not know the nuances, you can end up with a huge mess.
Here are some practical tips that you can use to remove popcorn ceilings from your home:
Determine if your popcorn ceiling contains asbestos. If you built your home before 1980, there is a chance that your popcorn ceiling contains asbestos. This is a dangerous material that can cause serious health problems. To do this, buy a special test kit or hire a professional.
Gather the right tools. To remove a popcorn ceiling, you will need a scraper, an aerosol can, a ladder, and safety equipment (goggles, gloves, and a respirator).
Clear the space. Make sure the room is empty before removing a textured ceiling. Cover large items that you cannot take out with a heavy-duty tarp.
Disconnect ceiling lights. This will reduce the risk of accidental damage. Secure electrical wires with special wire nuts to prevent electric shock while working.
Protect electrical outlets and light fixtures. Cover them with plastic wrap and masking tape. This blockage will prevent water from entering the outlet and reduce the risk of short circuits.
Protect floors, doors, and windows. Cover all surfaces with a heavy tarpaulin mat and secure it with masking tape.
Wet the ceiling. Fill a spray bottle with warm water and a few drops of detergent and spray the ceiling.
Scrape off the popcorn texture. You can use a wide putty knife for this. Use smooth, even movements to remove the material effectively. You can add more water to make the process easier. Wait 24 hours for the ceiling to dry before moving on to the next step.
Apply a sanding coat and sand. This will help you fill in any gaps and provide a smooth surface. Let the mixture dry, and then sand again to remove uneven areas.
After this, you can prime and paint the ceiling as desired.
Finally, you can remove the mat, put the lamps and fans back, remove the socket covers, and arrange the furniture.
Removing the popcorn ceiling is quite problematic. This process requires special tools and skills. The main problem with removing popcorn texture is the colossal mess it creates. Only professionals can remove popcorn ceilings without dust and dirt. If you’re intimidated by cleaning or need more time, hiring professionals is a great way to solve the problem.
How to simplify the process of removing popcorn ceilings?
If you want to simplify removing popcorn ceiling as much as possible, use the services of professionals from Renovated-Home. Experienced craftsmen will help transform your home into the place of your dreams. Renovated-Home craftsmen use leading technologies to remove textured ceilings. The surface is removed without dust and mess.
The Renovated-Home team works in Toronto and provides the highest professional services. Сraftsmens have extensive experience leveling ceilings, so you will not have to wait long. They will perfectly level the surface and clean up everything after themselves, leaving a clean space in your home.
If you have questions about the cost, request a consultation. Managers will contact you and calculate the cost of work individually, considering the area, ceiling height, and the presence of furniture. Get a free consultation right now. For the Silo, Kristina Rigina.
PS Audio Introduces Its Compact, High-Performance aspen FR5 Loudspeaker
– New FR5 stand-mount speaker delivers expansive sound in a room-friendly design
Boulder, Colorado, July 2024 – PS Audio recently announced the introduction of its aspen FR5 loudspeaker, a stand-mounted speaker that delivers the same quality of extraordinary musical realism as the larger aspen Series models, in a compact design that fits easily into smaller and medium-sized rooms.
The new FR5 features a custom-designed PS Audio push-pull planar magnetic high-frequency driver, complemented by a newly-designed midrange/woofer, and a high-excursion passive radiator. Available in satin black or satin white with optional matching stands, the PS Audio FR5 is styled to complement any décor.
Paul McGowan, PS Audio CEO pointed out: “The FR5 was designed to bring the same level of uncompromising sound quality as all aspen Series speakers into any listening environment, and is ideal for living spaces where floorstanding speakers can’t be used. Although it’s small, the FR5 delivers powerful and dynamic sound with extended bass, and will play surprisingly loud even in larger rooms.”
The FR5 measures 14.5 inches high by 8 inches wide by 13 inches deep (28.25 inches high with optional stands). The drivers in the FR5 are purpose-designed by PS Audio and are tuned for optimum performance in a two-way stand-mount configuration. The 2.5-inch planar magnetic ribbon tweeter is the same unit used in all aspen Series loudspeakers. It utilizes a symmetrical push-pull design with a high-strength magnet and a diaphragm made from Teonex® film, a material that provides exceptional clarity, transient response and resolution.
The aspen FR5 features a newly-designed 6.5-inch cast frame midrange/woofer made from Curv woven polypropylene, a material that is drawn into thin monofilaments and woven and reinforced using a proprietary process. The high-excursion driver employs a split-gap magnet structure with dual Faraday rings and a custom suspension. It’s augmented by a rear-firing 6 by 9-inch passive radiator to achieve in-room low-frequency extension down to 30 Hz. Both FR5 drivers are mounted on a thermoset resin front baffle that adds rigidity and minimizes diffraction effects.
PS Audio’s aspen FR5 utilizes a new enclosure technology, with viscoelastic damping sheets between the bracing and cabinet side walls, and around the woofer. This minimizes unwanted enclosure vibrations and contributes to the FR5’s superb imaging and spaciousness. The crossover uses air-core inductors, metallized poly capacitors, and wirewound resistors to ensure maximum sonic purity and seamless driver integration.
The FR5’s simple, elegant design is complemented by its optional matching stand, which has an integrated wire management system and can be mass-loaded. The FR5 comes with magnetically detachable grilles.
The aspen FR5 will be available in August 2024 at a suggested retail price of US $3,499/ CAD $4,771 per pair. The optional stands will be available at US $500/ CAD $682 per pair.
aspen FR5 Features at a Glance:
Enclosure type: sealed
High-frequency transducer: 2.5-inch planar magnetic ribbon tweeter with Teonex diaphragm
“Digital Domestic Dialogues” stages a near future in which technology has acquired an emotional and sensitive intelligence: it is capable of exciting itself and others through everyday gestures as an analog and primordial archive of human communication, culture and social dynamics.
Robots and users interact with a range of seemingly familiar objects through simple and natural gestures, triggering scenarios of everyday wonder. The collection, born out of a design exploration within the Habits Design Studio team, is a reflection on the poetic role of technology in the digital evolution of the domestic scenario. Technical Partners: Laminam, Giovanardi
COSMO
“Cosmo” is a lamp born from the desire to infuse new life into the act of lighting; the idea is to return to the primordial concept of fire, which through propagating from one body to another expands the quantity and at the same time transfers the luminous qualities of the flame.
“Cosmo” is able to learn the characteristics of the light source placed below it, detecting its intensity, color, movement, returning the effect to the environment and creating dynamic light scenarios.
The user is called upon to create the desired atmosphere himself by experimenting with direct sources, such as a candle flame or telephone flashlight; or by showing the lamp a video of a sunset, or another special moment he can evoke a light scenario. Turning it on thus becomes once again an exciting moment of awe and wonder.
The design of the lamp draws inspiration from scientific representations of black holes, the only phenomenon found in nature able to absorb light radiation. The captured light, is then returned to the environment dynamically and three-dimensionally by the spherical diffuser, allowing the creation of a 360° light scene, similar to HDRI images used in digital rendering software.
“Cosmo” redefines the boundaries of properties normally attributed to lighting fixtures with its ability to learn, imitate and stage emotions through light. Project by Selma Antonellini, Habits Design
RITO
The coat rack, a familiar but often overlooked object, is the subject of this project, which offers a contemporary reinterpretation of it with the product “Rito”; no longer just a support point, but an active companion that enriches the daily routine and transforms the experience of entering the home.
Thanks to artificial intelligence, “Rito”reacts to the presence of inhabitants, and recognizes when clothes and objects are hung or removed, interpreting the situation and animating the entrance area with dynamic projections on the wall.
The name “Rito” stems from a reflection on the fact that moments of entry and return home, though fleeting and temporary, are precious fragments of our lives, each with its own unique meaning and value. While some may be more ordinary and repetitive, such as returning after a day’s work or a morning walk with the dog, others can be more special and emotional, like returning after a long journey.
Regardless of the nature of the return, “Rito” aims to transform every entry and departure from home into a moment of warmth and hospitality. Its projections bring the wall to life, animating it with contextual content.
Before leaving the dwelling, “Rito” transforms the wall into a dynamic and inspiring space, offering motivational content, helpful tips, and personalized reminders. Upon return, it welcomes with tailor-made evocative scenarios, reigniting the surrounding environment and making the return even more pleasant and familiar. Project by Ilaria Tarozzi and Ilaria Vitali, Habits Design
VISIONARIA
VISIONARIA is a digital device that combines literary tradition with artificial intelligence, offering an innovative reading experience. Digital integration enhances the potential of printed material and opens up new imaginative horizons, transforming reading into a visual and artistic experience.
By swiping across the lines of a page in a book, similarly to how we would underline a beloved or noteworthy phrase, VISIONARIA recognizes the text. The selected phrase is then instantly input as a prompt into a dedicated AI generator, aiming to create an image of the book scene that can be viewed in real-time.
This mode of consumption, aided by the product’s pencil-like shape, introduces a new dimension to the reading experience, encouraging increased engagement that can be intimate and profound or shared on larger devices such as smartphones, TVs, and more, ensuring flexibility depending on the context – be it at home for relaxation and entertainment, in education, enhancing the consumption of educational content, or in public settings, stimulating imagination in artistic installations.
With VISIONARIA, literature evolves and broadens the spectrum of an age-old activity through an extremely accessible mode, towards unexplored scenarios in the world of culture and entertainment. Project by Alberto Milano, Michele Poggi, Marco Rissetto, Habits Design
1g1lm
1g1lm represents the unusual marriage of two seemingly incompatible units of measurement: “g” for weight in grams and “lm” for luminous flux in lumens. This lamp was born from a simple but fascinating question, “What would be the effect if light had a tangible weight?”
To visualize the weight, the lamp uses an elastic fabric on top. By placing an object on top of it, the fabric deforms, generating a unique and unrepeatable aesthetic because it is shaped directly by the weight, not predetermined by the designer. In addition, as the deformation increases, so does the intensity of light. Due to the light diffusion of the fabric, the light seems to take shape and weight. In the act of placing and taking objects, an impossible interaction with the very essence of light is realized, made solid and tangible for a moment.
1g1lm writes a new equation between light and matter, giving birth to a new ritual rich in poetry and at the same time exploring new alternative scenarios: proposing, in contrast to the digitization of the real, to make, through technology, concrete experiences that were once ephemeral and intangible.
Habits Design
Habits is a multidisciplinary industrial design studio, founded in 2004 by Innocenzo Rifino and Diego Rossi in Milan. The work of the studio is focused on technological and interactive projects of international relevance, partnering with companies to design timeless products and experiences.
The team is composed of industrial designers, electronic and mechanical engineers, model makers, interaction and visual designers, and interior designers with a global point of view. Recognizing the unique Asian technological know-how, Habits started a branch in Bangkok in 2021.With over 20 years of experience in a wide range of industries, today Habits mainly covers digital products, home appliances, automation, lighting, UX/UI, and phygital interfaces.
The team awarded more than 180 international design prizes such as Red Dot, IF, Compasso d’Oro, Design Plus, Good Design, and German Design Award. “We study science and art. We design new habits. Prototyping our ideas, embedding electronics, we reduce the gap between physical and digital.”
Laminam
Pioneers since the beginning.
Laminam was born in the early 2000s, following the invention of production technologies to create ultra- thin ceramic surfaces of large dimensions. A pioneering company, it was the first to revolutionize the ceramics market, giving new impetus to a mature sector, betting on the intuition of creating large architectural surfaces and launching innovative sizes and thicknesses on the market. Over the years, the company has developed a production process characterized by innovative methods and highly automated technologies typical of Industry 4.0 such as digital decoration systems, dry cutting systems and internal logistics managed by automatic laser-guided vehicles. These are methods and technologies that increase energy efficiency while reducing environmental impact.
Today Laminam produces and offers a range of eclectic and versatile large ceramic surfaces used in many applications – from traditional and advanced architecture to furniture and design – distributed in over 100 countries worldwide. Over the years, the series have been enriched with new textures and finishes to enhance the creativity of designers, architects and anyone who wants to give a new connotation to their spaces.
Giovanardi
Giovanardi designs, industrializes and manufactures supports for in-store communication (displays, merchandising, shop windows, shop in shop, technical packaging) and for art.
Giovanardi’s history began in 1919 as a manufacturer of plaques and dials: today Giovanardi SpA is an advanced, certified company, structured to process projects of increasing complexity, according to up-to-date technologies, with a network of accredited partners and an attentive, flexible, punctual client-service. For 100 years it has been shaping ideas.For the Silo, Elena Assante.
A truism in real estate is that the best time to sell is during the spring and summer months.
You have more buyers, prices and valuations are higher, and your home simply looks better under the bright summer sun than during the drab winter gloom. But what if you really need to sell your home now?
If you have a fence, then it’s the first thing that people encounter as they walk to your home. It should give a good first impression, so you need to fix damages if there are any. You can also consider repainting it to make it look new.
Don’t forget to make sure that the latch works perfectly too. It should close easily enough without any sort of fussy process.
Prune your trees.
The trees near your home shouldn’t block the buyer’s view of your house. Instead, the trees should have silhouettes that frame the house to make it look much better. It’s best to prune your trees during their dormant periods when they don’t have leaves. This makes it easier for you to see the shape and structure of the tree.
Remove the damaged and diseased branches first. Then get rid of the branches that hang low enough to obscure your house and hang over walkways. Finally, thin the crown to improve the air circulation and the amount of light.
Plant snow flowers.
You can plant early narcissi and snowdrops in your garden, along with a few clumps at the edges of your walkways. These can add some color to your home amidst all that white snow.
You can also plant hardy hellebores that thrive during the winter months, such as the Ashwood Neon, the Walberton’s Rosemary or even the stinking hellebore (H. foetidus).
Attract more birds near your home.
Having plenty of birds around is great during the winter. The place seems alive, and you get plenty of colors. You can do this simply by putting up a bird feeder on your property. You can also plant shrubs in your garden that are known to attract birds. These include bayberry, snowberry, and burning bush.
Touch up the house number.
Your house number is important because you want your potential buyers to find your home more easily. Sadly, plenty of homes have rather illegible house numbers.
Even those that are noticeable can seem outdated or downright unattractive. You can improve its look in various ways so that it becomes appealing and also prominent.
Keep the house clean.
One problem during the winter is that plenty of people track in mud after walking around in the snow and sludge. Often doormats aren’t just up to the job of getting rid of all that gooey mess.
However, you can arrange for boots to be removed first before people enter the home. If that’s not possible, you can at least buy and set up an effective boot scraper that can help your doormat get rid of the mess.
Use your Christmas lights.
Put them up early, and leave them up until February if you have to. These lights can really make your home look better.
Use plenty of Christmas décor for more color as well.
Wash your windows.
You need to get rid of the grime in your windows, which prevents the sunlight from getting into your home.
PS Audio Introduces Its aspen FR10 Loudspeaker, Ideal for a Wide Variety of Listening Rooms and Systems— New FR10 floorstanding speaker delivers the sonic magic of the aspen series in a smaller, more affordable form factor — Boulder, Colorado, December, 2023 – PS Audio today announced the introduction of its aspen FR10 loudspeaker, an elegant, slim 3-way floorstanding tower that brings the extraordinary sound quality and innovative driver design of the aspen series to a wider range of listening environments, systems, and budgets.
The new FR10 (SRP: $9,999 usd / $13,300 cad per pair, available now) features PS Audio’s acclaimed push-pull planar magnetic midrange and high-frequency driver technologies, complemented by ultra-low-distortion, linear-magnet woofers, high-excursion passive radiators, and a host of additional refinements. Like all the models in the aspen series, the FR10 has a sleek, refined appearance.
Paul McGowan, PS Audio CEO noted, “The aspen FR10 embodies more than 50 years of experience in audio in learning what works in a loudspeaker, and what it takes for a speaker to ‘disappear’ in a listening room and deliver a magical musical experience. Our goal with the aspen FR10 was to offer no-compromise full-range loudspeaker performance in a smaller, more affordable form factor that fits easily into smaller and medium-sized rooms.”
All the drivers in the FR10 are custom-designed from the ground up. The 8-inch planar ribbon midrange and 2.5-inch planar ribbon tweeter employ a push-pull design with an identical symmetrical motor structure on either side of their driver diaphragms. This inherently linear configuration provides lower distortion than conventional single-sided magnet structures, along with higher efficiency.
The midrange and high-frequency drivers employ high-strength magnets and diaphragms made from Teonex® film, a thin, highly stable material that provides exceptional transient response and resolution, with a fast, clean decay. The drivers are housed in a sealed sub-enclosure to ensure maximum clarity and freedom from internal cabinet colorations.
The PS Audio aspen FR10 utilizes dual 6.5-inch cast-frame woofers with a non-woven carbon fiber PMI foam sandwich cone, for an articulate response that complements the speed and transparency of the planar-magnetic midrange and high-frequency drivers. The woofers utilize a split magnetic gap with dual copper shorting rings, and have a large 3/4-inch peak-to-peak linear excursion for low distortion and a dynamically responsive bass output. The woofers are augmented by three flat-piston carbon fiber passive radiators. The FR10 offers wide range frequency response from 32 Hz – 20 kHz (- 6 dB, half-space; 25 Hz – 6 dB in-room).
The FR10’s slim enclosure measures 41.5 inches high by 8 inches wide (11.75 inches wide with its stand) by 16.25 inches deep. It’s available in a striking new matte finish in either black or white, and comes with magnetically detachable grilles. The aspen FR10’s room-friendly design makes it easy to set up and enjoy, and the FR10 comes with a handy setup booklet and CD to get the most out of the speaker. The FR10 has a visually distinctive “floating” appearance, with a curved bottom and an anodized aluminum base that is supplied with mounting feet that can be used with either removable stainless-steel spikes, or a soft rubber foot underneath.
The aspen FR10 delivers remarkable loudspeaker performance in every respect, with authoritative bass, an inviting midrange, smooth, extended highs, wide dynamic range, and palpable imaging on a wide and deep soundstage. It’s sure to thrill even the most demanding audiophiles and music aficionados.aspen FR10 Features at a Glance: Enclosure type: sealed upper midrange/tweeter module and lower cabinet for the woofers and passive radiatorsHigh-frequency transducer: 2.5-inch planar magnetic ribbon tweeter with Teonex diaphragm Mid-frequency transducer: 8-inch planar magnetic ribbon midrange with Teonex diaphragm Passive radiator: three 6 by nine inch flat-piston carbon fiber Woofer: dual 6.5-inch cast-frame, non-woven carbon fiber PMI foam sandwich cone Thermoset resin fiberglass-composite woofer baffle Magnetically-attached grille Computer-optimized custom crossover with premium film capacitors and air-core inductors Polished stainless-steel spikes with soft rubber feet enable a variety of mounting options Frequency Response: 32 Hz – 20 kHz (- 6 dB, half-space; 25 Hz – 6 dB in-room)Crossover Frequency: 550 Hz, 1,750 Hz Sensitivity: 86.5 dB Nominal Impedance: 4 ohms (3.3 ohms minimum)Recommended Amplifier Power: 50 – 125 watts Dimensions: 41.5 x 11.75 x 16.25 inches with base Weight: 75 lbs. (34.1 kg)Teonex is a registered trademark of DuPont Teijin Films.
A fireplace that doubles as art. image: theverybesttop10.com
Over the years, fireplaces have been a familiar feature in many homes, however until very recently, they have undergone very little change from the traditional hearth.
Fireplaces are becoming the design focus for many rooms in the house and with new technological advances it’s now possible to do more with the fireplace than ever before.
“We’re seeing some very interesting home designs that incorporate fireplaces in many creative new ways,” said David Coulson, of Napoleon Fireplaces. “While the traditional hearth will be a mainstay for many homes, modern fireplaces with crisp lines and glass frames will continue to rise in popularity with new homes and redesigned rooms. That being said we’re seeing several new trends emerge this season that are really changing the way people are thinking about fireplaces.”
Coulson suggests keeping the following hot trends in mind when looking for a new fireplace this season.
Napoleon outdoor fireplace
. Modern: The upcoming season will continue the trend of sleek and modern fireplaces. Look for clean, linear lines with less metal and more
glass. People want the full flame and don’t want black or chrome metal frames blocking the view or interfering with the lighting.
. Gas: Gas fireplaces will continue to rise in popularity this season. The convenience of flicking a switch compared to collecting, piling and lighting firewood is quickly winning out. The younger generation of fireplace buyers want a quick lighting fireplace that is cleaner and easier to maintain.
. Outdoors: 2014 will be a big year for the outdoor fireplace as people create or expand on their backyard oasis. The idea of turning a backyard into another room of your house is fueling the outdoor fireplace trend and Napoleon has developed several new models to accommodate this demand.
. Heat rises: Much like HD televisions, consumers are placing their fireplace inserts higher up on the wall. New technology allows for home
owners to insert enclosed gas fireplaces almost anywhere in the house and many people are taking inspiration from designers who are playing with the traditional ideas of where you find a fireplace.
. Unlikely locations: Much like the migration of fireplaces up the wall, more fireplaces are being installed in unlikely rooms. For example,
Napoleon makes several models which are ideally suited for the kitchen or bathroom. These fireplaces however are typically used to decorate the room, not to provide a main source for heating.
In the end, every room is different so it’s important to find the right fireplace that fits.
About Wolf Steel Ltd.:
It all began in 1976 when a small steel fabrication business launched by Wolfgang Schroeter started manufacturing steel railings in Barrie, Ontario, Canada. At that time, no one could imagine the incredible future that lay ahead for Wolf Steel Ltd. and eventually NapoleonR Fireplaces and NapoleonR Gourmet Grills.
Since the first wood stove rolled off the production line over 35 years ago, Wolf Steel’s commitment was to be distinctive and successful in everything they do. Napoleon’s commitment to producing quality products combined with honest, reliable service has proven to be successful framework to ensuring the continued rapid growth of the company. NapoleonR is an ISO9001 – 2008 registered company and now operates with 750,000+ square feet of manufacturing space and employs over 700 associates.
NapoleonR is North America’s largest privately owned manufacturer of quality wood and gas fireplaces (inserts and stoves), gourmet gas and charcoal grills, outdoor living products, waterfalls and a complete line of Heating & Cooling equipment.
Jim Carrey’s prolific career includes marquee comedy roles such as The Riddler, The Mask and Ace Ventura and critically acclaimed dramas Eternal Sunshine of the Spotless Mind, for which he won two golden globes and eleven MTV awards.
In 2022, he announced that he was taking a break from acting and was considering retirement. The prolific star has relocated to his vacation property in Maui and put the Brentwood estate where he has lived for the last 30 years up for sale.
Now listed for $26.5 million USD/ $35.2 CAD, reduced from $28.9 million USD/ $38.4 million CAD, the sprawling ranch-style mansion is nestled behind huge hedges and private red-brick gates.
The 12,700-square-foot home features five bedrooms, six full bathrooms, and three half baths. The stylish residence’s pitched high-beam ceilings offer tons of airflow, while skylights let in plenty of natural light to bathe the bright white walls and Jim’s extensive art collection, including his own impressive creations. The living, dining, and family rooms flow together with hardwood and polished stone floors, fireplaces and ample windows with views of the lushly landscaped grounds. The well-appointed chef’s kitchen offers an indoor BBQ. A circular breakfast nook looks out onto flowering pear trees. Multiple sliding glass doors open onto a central courtyard that provides space for entertaining or lounging in the classic California indoor/outdoor living style.
Jim’s primary bedroom suite includes its own private patio, plus a stunning wood-paneled bathroom with a copper-hooded fireplace, leaded glass windows, and a soaking tub. An Art Deco-style home theater pays homage to the movie palaces of old, with mohair-covered sofas, burl wood columns, and a lavish marble bathroom. The spacious gym and home office are perfect for the modern remote-work lifestyle. The massive two-acre grounds are a rarity in LA and include a full-size tennis court, a waterfall swimming pool, a pool house with bar, a sauna/steam room, vegetable gardens, and numerous mature trees. Walking paths wind through the serene environment, leading to the yoga and meditation platform. Carrey called the home “a place of enchantment and inspiration” and hopes it will continue to be “a magical sanctuary” for its next occupant.
One of LA’s most sought-after neighborhoods, Brentwood is right next to the hustle and bustle of Santa Monica but retains a community feel. Known for its tree-lined streets, unique mansions, and one of the best farmer’s markets in Los Angeles, Brentwood is home to numerous celebrities, including Arnold Schwarzenegger, LeBron James, and Tobey Maguire. Options for entertainment include the world-class Getty Museum, the Brentwood Golf Club, and the upscale shops and restaurants on San Vicente Blvd.
The listing is held by Janelle Friedman of Sotheby’s International.
The 12,700-square-foot home features five bedrooms, six full bathrooms, and three half baths, plus tennis courts, a waterfall pool, and an enormous two-acre lot.
For the Silo, Bob Walsh.Photos: Daniel Dahler for Sotheby’s International Realty
GE reveal® LED bulb provides the energy savings of an LED with color enhanced, full spectrum light to make vivid colors and patterns pop while filtering out dull, yellow rays
Unlike some LED bulbs, GE’s reveal® LED has the familiar size and shape of an incandescent bulb
GE Lighting has combined two of its most innovative lighting technologies—reveal® and LED—into one bulb.
Ideal for enhancing décor and architectural accent features in the kitchen, dining and living room, GE reveal® LED technology filters out dull yellow rays and delivers crisp, white light.
Making reds appear redder and whites whiter, this color enhanced, full spectrum of light illuminates bold design elements—such as an exposed brick wall and high-impact fabrics.
“So often we just take the color of light for granted—you flip the switch, and you get light. But GE reveal® transforms a room and dramatically reveals finishes and furnishings in a way that traditional lighting cannot,” said Mary Beth Gotti, GE’s residential lighting design expert and manager of the GE Lighting Institute. “GE reveal® LED lighting brings energy savings and a fresh new look to a room, enhancing colors and removing the yellowish haze that we don’t even realize is there until it’s gone.”
GE reveal® LED lighting appeals to the energy-efficient lighting consumer looking to make a design statement. The GE reveal® LED bulb uses 80 percent less energy than the traditional incandescent and lasts 13.7 years based on three hours of operation per day. The LED bulb also has the familiar size and shape of an incandescent bulb and offers dimming controls to create an ambiance for entertaining or simple everyday living. GE reveal® LED lighting is now available in 40- and 60-watt replacements for general purpose use, such as table and floor lamps, as well as the BR-30 indoor floodlight for track and recessed lighting in the kitchen, bathroom, dining and living room.
You can find GE reveal® LED lighting on store shelves at major retailers such as Canadian Tire. For more information about GE reveal® LED light bulbs, visit GE Lighting’s website.
I was immediately drawn to Carola Pimentel’s work when I was approached by a mutual friend to help with social media and public relations. Carola’s careful use of natural light, neutral color palettes, and layering of statement art and vintage finds from Europe reminded me of my time spent in Sao Paulo, Brazil as a teenager. What I didn’t realize then was that the homes and restaurants I would visit blended a certain modernism (perfect for the Brazilian climate) with a layering of European history from Portugal, Italy, and Holland (brought by years of immigration). The look I am referring to is Midcentury Brazilian design, and Carola is closely inspired by its cousin, Tropical Modernism. To dig deeper into what defines these two similar styles, I sat with the Caribbean raised and Miami based designer to discuss her careful and thoughtful approach to creating a home.
Full renovation of a house dating from 1925 in a family compound. Assure was involved in the project from the beginning working with CMA Design Studio Inc. on the preservation, modernization, and addition of new spaces.
Growing up in the Caribbean, what inspired you to pursue your studies and career in interior design?
My parents, contemporary and Latin American art collectors, introduced me to the world of architecture and décor when they took me to see a hotel they were developing together. They always tried to incorporate interesting art into their projects. I was very young, perhaps 7 or 8-years old, but I remember loving every minute of watching them create, alongside architects and builders, wonderful spaces. By high school, I knew I didn’t want to be an architect or engineer, but I wanted to somehow be a part of building and design. During a college fair I luckily learned of the opportunity to pursue my studies in Interior Design at Ringling College in Florida. You could say that an enjoyment of art-filled homes, as well as my parents’ involvement in the interiors and hospitality industries, prepared me for my career.
Assure Interiors completed a renovation and addition to a 1990s property on a large plot in Stonegate for a new family who required more space.
Your heroes include Oscar Niemeyer, Lina Bo Bardi, and Luis Barragan – all key examples of Latin American modernist architects. What do you love about their approach to planning, layout, and décor?
First and foremost, I live in a tropical climate and design for clients who often have homes in various tropical locations. It is therefore a practical choice to favor a clean aesthetic and distinctive structure that lets in plenty of ventilation and light. To clarify, I don’t design with tropical patterns and colors like a palm tree printed wallpaper. Instead, I design with durable materials, such as rich woods, cool stones, and warm leathers. I also pay a lot of attention to the surrounding geography and nature as they inform my choices in paint tones, wallpaper patterns, texture of fabrics, etc.
This Bal Harbour apartment was a collaboration with a long-standing client who was downsizing from a large penthouse to create a new home for her, as well as a setting for an important collection of twentieth century art and design.
I understand that you collect contemporary art. How do your favorite artists, their styles, and their works inform your approach to color, texture, and form?
Yes, I love art and I get a lot of inspiration from my own collection of contemporary Latin American and European works. Some of my favorite artists include Uruguay’s Pablo Atchugarry and Carlos Capelán, as well as Brazil’s Ernesto Neto, to name a few… I am particularly drawn to small scale sculpture and wall mounted installations, and attracted by the 3D quality and impact the pieces create in the context of a room. For me, art is a very important element of an interior as it gives a room character.
Assure Interiors was commissioned by a young and social art collecting family to create serene, light-filled and functional interiors. Assure was also asked to incorporate a collection of European antiques, French, Italian, Spanish 1950’s to 1970’s furniture, decorative art, and family heirlooms.
You have developed Assure’s aesthetic and style. Could you elaborate on the studio’s sensibility and point of view?
Since the beginning, I founded my studio in 2000, my priority has always been my clients. Delivering interiors where they always feel like home. I have been very lucky to learn from my own curiosity as well as my client’s passion for art and collecting. We often incorporate vintage elements found on sourcing trips to Europe and Latin America and mix these with exciting designs from galleries such as Ralph Pucci and Cristina Grajales (among others). We design rooms that acknowledge and respect these beautiful and unique objects, and then choose lighting, furniture and fabrics that beautifully complement them. The interiors that we create for our clients are modern, practical, functional, and elegant.
The client did not want to sacrifice lifestyle or comfort while living in this Coconut Grove apartment temporarily in between houses. Assure Interiors, therefore, was asked to incorporate existing furniture and create a stylish base for the family.
Looking to the future, what projects are you most excited about that will be completed soon?
We have several interesting residences across Florida and the Bahamas that will be ready in the next few months. However, what excites me the most about being an interior designer is the opportunity to start from the very beginning and to work alongside the architects on designing and planning the layout of a brand-new home. I love every minute of it from start to finish, including details like plumbing, lighting, and finishes. At Assure Interiors we are incredibly hands on and creates highly nuanced, timeless and livable homes.
Assure Interiors renovated and extended a recently purchased house in Cocoplum for repeat clients (an international couple and their three children). For the Silo, Victoria Hood. Photography: Mark Roskams
As the world continues to grapple with the pandemic and challenging mental health issues, it’s more important than ever to find ways to bring joy and beauty into our lives. One way to do this is by infusing our living spaces with personality, whether it’s our homes, offices, or our boats. For refined yacht owners, it’s natural to diverge towards things that bring comfort on-board – including art.
Not falling short on sophistication, the real value of art lies in its ability to inspire and uplift us. In practicality, however, when it comes to decorating a yacht, there are a few key concerns to keep in mind.
It’s important to consider the amount of art one wants to display. While it might be tempting to fill every inch of wall space with your favorite pieces, it’s important to strike a balance between aesthetics and functionality. An overcrowded space can be overwhelming and distract from the overall design. Equally essential, durability is a crucial factor to consider as art on-board will be exposed to elements like water and must withstand rough seas. Fortunately, there are experts in yacht customization that can deliver art in the most practical way.
For yacht owners, the key areas where art can really make a difference are the master bedroom, living area, and bathroom. In the master bedroom, a carefully chosen piece can create a calming and relaxing atmosphere, while in the living area, a bold and eye-catching piece can be the perfect conversation starter. In the bathroom, a fun and whimsical piece can add a touch of lightness.
For those who wish to incorporate contemporary art, The Margulies Warehouse boasts an extensive collection, featuring artists such as Jennifer Steinkamp and Daniela Wicki, who play with the symbiosis of materials and technology. Another great choice for those with eclectic taste and looking for individual pieces is The Gallery by Rudolf Budja, which offers a selective collection of texturized canvases and photography sure to impress any art lover.
Delving into ways to bring art on board, it is captivating to incorporate design elements into the very fabric of the yacht itself, a popular trend in yacht design. For example, Futurestones and KMD are experts in creating stone finishes. They transform spaces and bring a unique energy to the yacht with the use of murals and large-scale artwork as a backdrop for the interior. These details help create a cohesive design aesthetic and add a touch of personality to the vessel.
At the most recent Miami Discovery Boating Show, I observed a surge in stylish watercrafts, ranging from medium-sized yachts to super yachts.
One brand that stood out to me as an excellent example of balance in design elements is Fiart Mare, particularly their 35′ Seawalker and 39′ Seawalker models. These boats offer an exceptional combination of functionality and Italian design, maximizing the available cabin space. Yacht Creators, the exclusive dealer for Fiart Mare, has collaborated with top shipyards worldwide to bring unparalleled interior design to the US market.
In addition to Fiart Mare, Yacht Creators represents other renowned brands such as Prime Yachts, Van Der Valk, Leven Yachts, and Waterdream, all of which are built with exceptional craftsmanship and worth the time for someone who dreams of building and owning something special.
For me, interior design on yachts is “art on art”.
While yacht craftsmanship is a complex process that involves multiple layers of design, art on board can take many forms, from custom-designed furniture and fixtures to entire walls/doors adorned with intricate patterns and designs. These bespoke furnishings can range from tables and chairs to lighting and cabinetry, and serve to enhance the yacht’s individuality and make it truly one-of-a-kind.
The sky’s the limit when it comes to bringing a touch of artistic flair to a vessel and creatively maxing out cabin space. So whether you’re a seasoned collector or just starting out, don’t be afraid to bring a little bit of art on board your life – and your yacht.
For the Silo, Nancy Gonzalez/Private Yacht Finance. Featured image: Fiart Seawalker 35.
Concrete workers are unsung heroes. Their work doesn’t end, even when winter hits and the temperature drops.
Unlike people who work in the warmth of an indoor space, they may not have the luxury of avoiding the harsh weather.
Without the right precautions, they may suffer from problems such as hypothermia, frostbite, or trench foot. The wet weather can also increase their risk of injury. If the weather is extremely harsh, then work can be called off for safety reasons.
However, workers who are trained and experienced to work in cities that experience colder climates usually adapt well. For example, if you need someone to help you with concrete cutting in Calgary – then you can easily find a reputable and professional locally owned and operated company that’s been serving clients in cold climates for decades.
Here are a few ways concrete contractors adapt to the winter:
#1 They Pay Attention to the Weather Forecast
When working outside, contractors pay attention to the weather forecast. They identify potential weather-related issues so that they can prepare in advance. They also try to use daylight to their advantage and have artificial light to help if necessary.
#2 They Protect Their Body
When working in the cold, concrete contractors usually wear multiple layers. Some also wear insulated clothes, which shield the skin from moisture, and thermal undergarments. The outer layers are waterproof and quickly removable. On their heads, they may wear a wool liner under their hard hat.
In the winter, contractors may take more short breaks to warm up their bodies or their clothes. They may also try to get the most work done during the warmest part of the day. The buddy system also comes in handy during the winter, where partners can look out for each other.
#3 They Protect Their Hands
Gloves are especially important in the winter. Many contractors prefer leather gloves because they’re more resistant than cotton gloves, which can get damp. When the temperature drops to less than 20 C, they may switch to mittens. However, mittens aren’t always practical for work.
#4 They Protect Their Feet
Waterproof boots are a must in the winter. Contractors may treat their leather boots to waterproof them further and wear insulated socks. They may also wear multiple layers of socks, with the outer sock being the largest size. Some carry extra socks in case they need to work outdoors for longer periods.
#5 They Protect Their Equipment
After donning the proper equipment, concrete contractors also take precautions with their equipment. They avoid using cold tools because this can lead to problems. Instead, the tools are warmed up before they can contact concrete.
Tools with metal handlebars are treated with extra caution. Metal handles are covered with an insulating material to protect workers. Usually, contractors only use equipment that’s designed to be handled with gloves or mittens. Contractors may also use powerful tools that are integrated with dust collection to avoid cutting wet.
These are a few ways concrete contractors adapt to the winter when doing outdoor work. With the right precautions and appreciation from their clients, they get the job done correctly and safely.
What once was a successful pairing between Johnny Depp and Amber Heard has changed course and their dirty laundry is playing out in real time all over the world. Whether real or as a way to get each back into the limelight and boost their careers, the court case has proven to be entertainment on a level that has at times even had the judge laughing. One thing unfolding is that Amber appears to have her heart set on acquiring one, if not all, of Johnny’s fabulous L.A. penthouses.
What’s so desirable about them? Find out more via this article sent along to us from our friends at toptenrealestatedeals.
Known for being a somewhat dark, idiosyncratic actor, Depp has followed his own instincts in his choice of parts since his first role in Nightmare on Elm Street in 1984.
A Florida high school dropout at age 15, he played in several garage bands and married early. When he and his new wife took a trip to Los Angeles, in a stroke of good luck he happened to meet Nicolas Cage who suggested he go into acting. This led to his first film role in 1984’s Nightmare on Elm Street and quick successes in Edward Scissorhands, Sleepy Hollow and the Pirates of the Caribbean series. He then moved on to more serious parts portraying drug and gangster criminals in Blow, Public Enemies and Black Mass.
Widely considered one of Hollywood’s best actors and box office stars with Golden Globe and Screen Actors’ Guild Awards, Depp has made headlines from his movies, love life and his interesting real estate holdings, which include an island in the Bahamas. At various times engaged to Sherilyn Fenn, Jennifer Grey, Winona Ryder and Kate Moss, Depp had a long relationship with French singer-actress Vanessa Paradis. During his Paradis years, he purchased an entire French village which was recently on the market at $55.5 million usd. After he split with Vanessa, he married Amber Heard in 2015, but divorced just one year later. Listed after the $7 million usd divorce settlement with Heard is Depp’s unique collection of penthouses in downtown Los Angeles.
Depp acquired the five multi-storied, side-by-side penthouse units over a period of years after the building had been refurbished in 2007.
Decorated in his unique style, he never joined the units, but instead lived in them as though going from room to room, or lent to relatives to use.
Whether or not it was a conscious real estate business decision or a happy fluke, it means that the collection of units can be resold as a whole or individually. The group includes five condo units: four two-bedrooms and a one-bedroom, totaling approximately 11,500 square feet.
The 13-story Eastern Columbia Building was designed by Claud Beelman in 1930, considered to be one of the city’s best examples of Art Deco architecture still standing.
Johnny Depp’s collection of five penthouses in the famous Los Angeles Eastern Columbia building were available in 2016 as a group for $12.78 million USD; they are not currently on the market. For the Silo, Genelle Brown.
Photos: James Lang, Berlyn Photography for Partners Trust (now Compass) Video Credit: Sean Evans, @evvo1991
I swam three times a week, ran a few miles every other day and on weekends, I would bike with friends. There was not an ounce of fat in my body. But as years passed, I became too busy with work and eventually with raising a family that exercise became less important and I didn’t bother going to the gym. It came to a point when I saw myself in the mirror and hardly recognized my own body. In a span of 14 years, I gained over a hundred pounds. I realized I needed to do something about it and fast. So I browsed the best online shopping sites looking for affordable gym equipment that I could just set up at home. I can’t go to a gym because, well…… Covid duh! Plus I can only workout in the wee hours of the morning when everyone else in my home is still fast asleep.
Start Cheap
Many of my friends made the mistake of investing in equipment that cost over a thousand dollars and ended up not using them anyway. The truth of the matter is that it’s very possible to create a home gym for very little money. In doing so, you won’t be wasting money in case you find yourself not using your home gym and if you do decide to fully commit yourself to a healthy and active lifestyle then you can always upgrade your equipment and machines in the future.
The following are the most essential things you’ll need:
1. Private Space
It’s difficult to work out when you have screaming kids running around you. Ideally, pick a room with a door so that you can exercise uninterrupted.
2. Full-Length Mirror
Being able to see yourself working out is a great motivator and it’s also a good way to check your form and technique. You can buy a full-length mirror for around $20 – $30.
3. Weights
Every home gym should have a set of dumbbells. For women, start with 5, 10 and 15 lbs. Men should use heavier weights. Or you can get an adjustable dumbbell that will enable you to add or swap weights easily.
Okay some old school equip has seen it’s day but don’t dismiss all vintage gym gear!
4. Stability Ball
Old school trainers would never recommend the use of a stability ball but it’s actually very popular among fitness experts today. With a stability ball, you can improve your core strength and balance. Besides, there are many exercises you can do with this ball – body bridges, squats, crunches, hamstring curls, and others.
5. Resistance Bands
These bands are very versatile despite looking plain and simple. You can strap it to a door, bench or table to do squats, chest presses, and lat pull-downs, to name a few.
6. Cardio
You can get a skipping rope so that you can do cardio exercises in your home gym. Or you can just go outside to run, jog or walk. Cardio exercises are essential to help your body burn fat faster. For the Silo, Dimitry Karloff.
Have you ever wondered whether the air that we breathe indoors can be equally harmful as outdoors?
When it comes to healthy living, the air that circulates inside our house is often more crucial than the outdoor air, pollution, smog and other environmental factors. Research suggests that the indoor environments can have up to five times more pollutants than outdoor ones thus affecting several parts of our body including skin, lungs, nose, eyes, and throat among others. Once inhaled, these very air pollutants can continue to have harmful effects as and when it is processed through our systems. Just think over it. Ever felt stuffy in a room only to feel refreshed once you have stepped out? That lethargic feeling is directly related to the poor quality of air inside the house. And when you are exposed to such an indoor environment year after year, it can have a serious effect on your daily life.
What are the root causes of poor indoor air quality?
According to the experts from The American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) here are the factors that can lead to poor indoor air quality:
Building Design and construction
Building wasn’t checked thoroughly to see if it was suitable for the occupants
Ventilation systems are dirty and damp
Indoor contaminant sources
The equipment and activities carried out indoors that add to the contaminants
Moisture trapped in the building enclosures
Failure to check filtration and air cleaning
Poor outdoor air quality
Poor ventilation rates
With Canadians spending over 90% of their time staying indoors combined with the COVID-19 pandemic, it is now more than ever that the role of indoor air quality has gained prominence. First, we need to understand the need for getting an air quality test done within your premises.
Healthy buildings improve performance and productivity of the residents
Healthy folks take lesser sick leaves
The test validates your space’s current indoor air quality
Verification of your space meeting the indoor air quality standards
Address any concern or issue arising due to a complaint
Prioritize the health and safety of the occupants
Obtain or renew LEED, WELL or BOMA BEST certification
Gateway Mechanical as a company continuously strives to assess, audit and improve health and safety program to reduce the risk of injury in a changing work environment. The indoor air quality test offered by Gateway Mechanical will solve all your queries regarding the health of your space’s air quality. This test investigates the air quality within your premises for the following:
It turns out there’s a lot we can do to control and reduce these contaminants to make our facilities, buildings, and spaces safer. To summarize, good indoor air quality significantly increases occupant health and experience in the provided space, enhances performance and productivity, drastically reduces absenteeism, optimizes returns on your investments, and eventually boosts your triple bottom line. For the Silo, Mike Robert.
Whether you’re a hockey fan or a basketball fan – or even both – the luxuries that every sports aficionado desires to have in their living room are all the same. You want comfortable furniture, a large, high-definition television, good friends, and great snacks – including a refreshing beverage or two!
If you’re like most sports fans that appreciate the luxury of owning a fancy home theatre system so you and your friends can watch every game in style – not to mention the accuracy of high-definition picture and sound – then you’ve probably already invested a significant amount into your electronics. All too often, the living room setup boasts phenomenal devices on which to enjoy the game with very little else left in the room that is even remotely appealing.
Coffee Table
One of the most important parts of your living room is the place where you’re going to set all of your snacks. During play-off season, it isn’t uncommon that the coffee table becomes overflowing with delicious items. When this is the case, you no longer have room for your laptop or your feet. If you’re a sports fan that’s looking for a new coffee table, why not buy an item that can equal the impressive size of your television?
If you’re interested in getting a coffee table upgrade but aren’t sure where to look, you can check out these gorgeous natural wood coffee tables for a few impressive options.
Entertainment Unit
A quality built entertainment cabinet made of solid wood can really separate the men from the boys. A thrilling sporting event may cause you and your crew to occasionally act as rowdy as you did in college, but that doesn’t mean that you should furnish your home like you’re living on student loans. Watch the game like a gentleman and bring some class to your living room with a handcrafted solid wood entertainment unit.
Buffet Table
Even the most impressive coffee table will occasionally overflow. If you want to build the ultimate game-viewing experience, include a piece of furniture that is wholly devoted to presenting your feast. This way, your coffee table won’t be cluttered and can be used as it was meant to be used.
Custom Made Furniture
If you’re really interested in getting stylish, one of the best options you can invest in is to order your living room furniture to be custom made. With a custom made piece of furniture, you get an item that is absolutely unique. You’ll also be able to choose specific design choices, such as:
Type of Stain
Variety of Wood
Live Edge Features
Texturing
The end result will provide you with an option that is perfectly suited to your personality and perfectly suited to your home.
Play-off season may be just around the corner but after that it will be time to start watching a whole other league. You make good use of your living room, so why not invest in one you can be proud of – upgrade your furniture to handcrafted solid wood before the end of the season.
Featured image- Dundas Coffee Table by woodcraft.ca
Your home isn’t the just place that you reside and raise your family, it is also an investment. This is why it is important to try and improve the overall value of your house whenever possible. Thus, if you need to sell it in the future, you can end up making quite a profit. Of course, this can only be achieved if you make the right changes to your home. To figure out what these are, keep reading…
Upgrade the Right Parts of Your Home
Believe it or not, only a few sections of your home need to be updated. The rest can be left as is and you can simply modify them with a coat of paint. However, there are some regions that people use more than others. So, by ensuring that they are kept modern and effective, you can boost your home value quite a bit.
In particular, you should upgrade your kitchen and your bathrooms. Now, there is no need to go overboard – a serious overhaul will not provide you with the return on investment that you are looking for. Instead, make changes to improve the look and the functionality of these spaces. Home buyers will look for these modifications in particular.
Add More Rooms
As you can imagine, homes with a greater number of bedrooms are also held in high value. This is why you should try to add one for the lowest price possible. So, instead of building a new space, see if you can convert a current room in your home. For instance, do you have a basement? If so, check out these Penguin Basements ideas to see just how you can transform this space into a functioning, livable area. It is actually a lot easier than you might imagine.
Penguin wine storage solution.
Create a Versatile Space
Even if you don’t want to build an extra bedroom, you should still get a quote for a basement finishing in Brampton. Why? This is because your basement can be used for a number of different purposes. And, while you may not have much need for it, the next family might. Thus, by making sure that it is all cleaned up and waterproofed, you will automatically be creating a versatile space. You will then be able to market this in any way that you want, depending on the people that you would like to sell it to.
Maintain Aesthetic Appeal
As you can imagine, aesthetic appeal can be rather important when selling your home. After all, most home buyers will base much of their decisions on how the house looks. Thus, painting the interior and exterior can go a long way towards boosting value. Not to mention, you should also fix or replace any fixtures or features that are worn out or damaged in any way. Last but certainly not least, make it a point to keep your gardens and curbs in good condition.
These are all of the ways that you can add some serious value to your home. So, if you are considering making any changes, these are the ones that you should begin with.
Luxurious living, money and fame are things that spring to mind when thinking about hotels London. Many of them have stood the test of time and built a sterling reputation all over the world attracting many of the rich and famous.
Here we’ve compiled a list of the most renowned hotels in London.
Claridge’s, London
Claridge’s London- 5 Star Hotel. Address: 49 Brook St, London, Greater London W1K 4HR, United Kingdom
Opened in 1854 Claridges London is one of the oldest hotels in the city. Located in London’s infamous Mayfair, Its clientele are among the rich and famous with celebrities such as Brad Pitt and Mick Jagger no stranger to its doors. TV favorite Gordon Ramsay also had his own restaurant there for a time.
Its décor and facilities boast the best in fine dining and luxury living unrivalled in London and has over its long lifespan attracted royalty from all over the world. The hotel was also the feature of a 3 part documentary series for the BBC entitled ‘Inside Claridges’.
The Connaught, London
The Connaught London. Five star Hotel. Carlos Pl, London W1K 2AL, United Kingdom
Residing in Mayfair, the Connaught first opened its doors in 1815. The hotel allows both traditional British and contemporary design to co-exist by maintaining its Victorian exterior and completing a 70 million pound internal refurbishment by lead designer Guy Oliver.
This hotel and its staff have won many prestigious awards over its lifespan including its spa winning first prize in the spa category in the Hotel & Lodge Awards 2012 and it’s very own bartender Agostino Perrone winning International Bartender of the Year 2010.
Brown’s, London
Brown’s Hotel London. Five star Hotel. 33 Albemarle St, London W1S 4BP, United Kingdom
One of London’s most established hotels is Browns. Opening its doors in 1837, it celebrated its 175th anniversary in 2012 and has consistently attracted guests of wealth and fame, most notably President Theodore Roosevelt and Oscar Wilde.
Not only does this Mayfair hotel boast a stunning Victorian 5 star setting it is also within walking distance to some of London’s busiest attractions such as Hyde Park, Bond Street, Regent Street and some of its most famous landmarks.
The Great Northern Hotel
First opened in 1854, London’s Great Northern Hotel is “an exquisitely designed luxury boutique hotel with an extraordinary location, literally within King’s Cross Station and just 25 metres from the Eurostar terminus at St Pancras International.”
Dubbed as ‘The World’s First Great Railway Hotel’ , The Great Northern is a stunning boutique hotel with rail connections to Europe and beyond via the Eurostar. It stands tall above the areas surrounding buildings and it’s a significant point of interest for all arriving into Kings Cross St Pancras station.
Designed by infamous architect Lewis Cubitt stood as the centrepiece for the steam revolution.
The Berkeley
The Berkeley Hotel London is a five star Hotel. Wilton Pl, Knightsbridge, London SW1X 7RL, United Kingdom
The Berkeley is a five star deluxe hotel, located in Knightsbridge, London. Its history spans well over a 100 years and has even moved buildings. The infamous hotel began its life at Berkeley Street and served as accommodation for mail coach drivers travelling to the West Country.
In 1972 it moved to its current location, incorporating an entirely new refurbishment to include London’s only rooftop swimming pool. Aside from its unique facilities and décor the Berkleley has attracted numerous Michelin star chefs including Pierre Koffmann and more recently Gordon Ramsay and his Boxwood Café. For the Silo, Susan Varano.
Here are some quick shots I did of our place. For us, the challenge is to use every possible space and yet achieve a feeling of spaciousness. I just did a count of all the space saving/creating measures we have made over the years – about 25 – not counting replacing, enlarging and adding windows and doors – from simple shelves to complex projects involving cutting into walls and making a new room.
It has taken us more than 20 years to do this. We purchased the place and a barren 3/4 acres in 1986 for $20,000. And, it has turned out even better than we dreamed possible.
Even in this tiny space, we can lose each other. David Wells, my partner in all this, has a blog in which he talks about our life here. You may be interested: http://DavesBackPorch.blogspot.com/p/about-me.html
OUR SMALL HOUSE
EXTERIOR FRONT
INTERIOR – FRONT
INTERIOR FRONT
‘HALL’ FROM FRONT DOOR TO KITCHEN
MIRROR IN ‘HALL’ TO REFLECT MORE LIGHT
OFFICE/COMPUTER (to the immediate right of above ‘hall’)
KITCHEN STORAGE AND TABLE (other side of office above)
KITCHEN – small but functional. As a former professional
cook, I have found ways to scale equipment way down,
and use my creativity to produce nutritious, interesting meals.
NEW KITCHEN DOOR ENTRY – STAIRS TO JEWELLERY STUDIO AT RIGHT
JEWELLERY STUDIO – PREVIOUS ENTRY
NEW BACK ENTRY
BEDROOM (7′ X 11′)
CLOSET – DVD STORAGE – behind door
BATHROOM w CLAWFOOT TUB – AND WINDOW LOOKING
OUT TO ‘WOODLET’ (A Spa at Home)
BATHROOM VANITY WITH BEACH GLASS MOSAIC INTERIOR WINDOW
TO LET LIGHT INTO CENTRE OF HOUSE
With an increasing demand for housing in the UK and strict planning restrictions, developers are attempting to fit as much “house real estate” as possible within smaller and smaller areas.
This means that most new builds are half the size of the homes being constructed at the start of the 20th century.
Despite this eye-opening reality, there are plenty of people who are happy to sacrifice space for location – especially moving closer to the capital.
We’ve looked at this trend, determined the main pros and cons of smaller house living and even looked around the world for extreme examples of homes which push the limits of square footage. Want to weigh up the pros and cons of small house living? This graphic from our friends at storageworld.co.uk provides a great start point for your research.
Read on to find out whether you’re cut out to thrive in this new era of space-efficient living. For the Silo, Georgia Davies.
Computer display in John Carpenter’s 1982 sci-fi classic The Thing,
Getting Into Hollywood Accidentally…When I conceived the idea of a computer and technology museum around 25 years ago I didn’t concern myself with things like revenue models and how the place would be funded. Instead, I just worried about getting the coolest (and oldest) pieces of technology I could in order to have the best displays possible and appeal to the widest range of people.
Fortunately, I still think like that. However, the reality of having to pay bills for storage and electricity and all of the other things that come with running a proper business (and make no mistake, a museum is a business) means that on top of having some of the greatest technology pieces in the world to look at I must find ways of making money along the way.
A couple of years ago a production company called me asking for some early computers to use in a documentary about the origins of the internet that was going to run on the Discovery Channel (or was it the History Channel?) The guy was such a quick talker that I never really got a chance to get concrete information on what the show was going to be called or when it was going to air. To this day, I still don’t know if it ever did.
Then the CBC called. They were looking for an older computer running DOS with WordPerfect, the de facto standard in word processing – in 1989. An upcoming episode of “The Fifth Estate” required a computer recreation from the 80’s and they wanted to know if I could help. I missed the initial call and by the time I had gotten back to them, they had located something locally. It was at this time, however, I started thinking differently about our collection.
Some time had passed, and then the television show “Design By Decade” called. They needed some pictures of machines from the 90’s (and yes, in terms of computers, these are now quite ancient) and then Wired magazine asked for pictures as well. People writing Wikipedia articles were asking for permission to use some of our unique photos of machines to enhance their submissions. I started to think that we were really onto something.
When I first heard about a remake of 1982’s “The Thing” I never knew I would have something to do with it. A production designer called about putting computers from that time period into the 2011 remake. The only unfortunate part, because of the nature of the film, was that they would require purchasing the computers, not just renting them. “I can’t very well rent them from you and potentially return them with fake blood on them now can I?” I recall her saying. I had to agree. In the end, none of our computers actually made it into the film but I did my part as a consultant and helped steer the production in the right direction.
Earlier this year (2012), someone from Cineflix Media called. I recognized the name from the American Pickers and Canadian Pickers shows I somehow ended up addicted to. They required a recreation of a 70’s something office with computers and related materials. Dubbed as the “world’s most heroic airborne combat missions” it seemed like the furthest subject matter from computers I could think of, but hey, everyone needs to have an office, right? Getting paid for renting out our equipment was a real bonus, plus we got to be part of something cool. Now I found myself thinking about what the television and movie houses might want and have started acquiring those machines. Typewriters and old cell phones are now filling the nooks and crannies of our storage units.
Most recently a Toronto production company called, producing a film called “Public Service”. A short film that will make its rounds in the film festivals next year, it stars Gil Bellows (“Ally McBeal”) and Sheila McCarthy (“Little Mosque on the Prairie”). The majority of the film takes place in a government office in the mid 70’s and required some hard to find computers. A large one that normally sits in storage because it’s too big for even us to display was used during filming. We are excited to see how it all turned out, but we now feel like we’re pros at renting our stuff out to production companies.
We are presently working on expanding our website to included film and television production rentals as part of our service offering. It has not only become a nice revenue stream for the museum but it’s also exciting being involved in television and film. From the CRT screen, to the LCD screen, to the Silver screen we go! For the Silo, Syd Bolton.
With Streetinsider.com recently reportingthat Apple sold an estimated 6 million iPhone X units this past Black Friday weekend alone, as calculated by an analyst with Rosenblatt Securities, and with untold millions more sure to sell throughout the holiday season, it’s clear the marketplace is embracing this new iPhone iteration. In fact, the analyst firm is so optimistic that it increased December quarter iPhone X shipment estimates from 27-28 million to 30 million units.
Given each new iPhone model launch ushers in an abundance of equipment and accessories hell-bent on helping users make the most of their prized smartphone, I began wondering what extras are on tap for the eagerly anticipated iPhone X. In the event that your own curiosity is piqued just the same, or if you’re one of the multi-millions of customers for whom iPhone X marks the spot in your heart (and wallet), here’s an array of accouterments that can help ensure smartphone satisfaction for any X-phile. All prices are in US dollars and are msrp.
ALLDOCK USB Charging Station (www.Alldock.com) – Starting at $129.00
The ALLDOCK is a multi-port USB charging station that offers consumers a piece of technology that looks like anything but, allowing them to embrace their electronics and avoid the cable chaos. This interior design-friendly gadget gives users the ability to charge all devices you’re your iPhone X, as well as other smartphones and tablets, all in one place. Accessory add-ons include a docking mount for the Apple Watch, Fitbit Wearables, Apple Pencil and Apple AirPods (more charging add-ons are to be released the company says). It offers all around compatibility for both wireless and quick charge phones, and delivers a 40% quicker charge as compared to using a standard charger. ALLDOCK is available in two sizes and is offered in various premium materials such as Bamboo, Walnut and Aluminum.
Skyroam Solis is a dual 4G LTE global WiFi hotspot and power bank. It satisfies the most significant needs of travelers with super-fast LTE speeds, long-lasting battery and mobile charging that will keep users powered-up all day long. Skyroam service seamlessly connects users with mobile WiFi on-the-go through its proprietary global WiFi network that’s powered by patented virtual SIM (vSIM) technology. With instant access to secure, unlimited data in over 100 countries, Skyroam Solis offers the convenience of going from one country to another without configuring local SIMs, updating plans, or incurring roaming charges or overage fees. Plus, it’s shareable on up to five devices simultaneously.
Mophie makes charging your iPhone easier than ever. This wireless charging base includes the latest Qi technology and delivers fast charging speeds of up to 7.5W to your phone on contact. In fact, it delivers safe charging speeds 50% faster than standard wireless chargers. The non-slip finish ensures perfect placement, and the included wall adapter means you get everything you need right in the box to start charging right away. The wireless capability also allows users to be clutter-free and take the base with them while they’re out and abut; making it a portable option for those indelibly on-the-go.
photo- Mophie
Tech Armor ActivePower External Battery Dual USB Power Bank (www.TechArmor.com) – $39.99
Compact and lightweight, the Tech Armor 6000mAh Power Bank will boost your smartphone’s battery life, ensuring you’re charged up for your entire day. You’ll get not just one, but two full charges for your smartphone. And, it boasts a built-in flashlight. The Power Bank also has dual USB ports to charge two devices at once, such as a phone and a tablet. Tech Armor’s high performance ActivePower external battery packs use only the highest quality, Grade A Korean battery cells available on the market. With four models to meet anyone’s power needs, Tech Armor ActivePower series his sure to have something for you. This 6000 model is covered by a hassle-free two-year warranty. The company even says that they are committed to your satisfaction and will send you free replacements for defective or unsatisfactory product.
Ventev Mobile’s Powercell 6000+ is a useful device for frequent travelers who hate carrying multiple chargers to keep all of their gadgets and gear juiced up. The Powercell 6000+ is a 6000mAh, dual output portable backup battery that provides a full 25 hours of talk, 18 hours of Internet, 20 hours of video or 100 hours of audio playback power. It features 1A and 2.1A ports that allow for optimal and simultaneous charging of phones and tablets, and built-in folding AC prongs that make recharging the battery extremely easy. Also from Ventev Mobile is thePowercell 3015c, a 3000mAh portable battery with a built-in Apple Lightning cable. The slim, wallet-sized device provides 12 additional hours of talk time and features an on/off button with LED battery indicator light. The attached cable eliminates the need to carry around pesky removable cords to charge your devices while on-the-go.
photo- murrayontravel.com
For the Silo, Merilee Kern.
As the Executive Editor and Producer of “The Luxe List,” Merilee Kern is an internationally-regarded consumer product trends expert and hospitality industry voice of authority—a travel, dining, leisure and lifestyle expert who spotlights noteworthy marketplace innovations, change makers, movers and shakers. She reports on exemplary travel destinations and experiences, extraordinary events and newsworthy products and services across all categories. Reach her online at www.TheLuxeList.com, on Twitter at www.Twitter.com/LuxeListEditor, on Facebook at www.Facebook.com/TheLuxeList and on Instagram at www.Instagram.com/LuxeListReviews.
Here’s the fineprint- ********Some or all of the accommodations(s), experience(s), item(s) and/or service(s) detailed above may have been provided at no cost and/or sponsored to accommodate this review, but all opinions expressed are entirely those of Merilee Kern and have not been influenced in any way.********
Maybe you watch all the TV shows, follow the blogs, and read all the magazines (or perhaps just look at the pretty pictures) and still wonder what Interior Design really is, what a Designer does, and if you would benefit from working with one? If so, then read on because here’s the nitty gritty on Interior Design and the passionate Designers working within it.
Interior Design is about providing “creative design solutions for interior environments and its clients. It is the combination of technical and analytical skills with an aesthetic vision to achieve spaces that are functional, support the health, safety and well-being of users, enhance the quality of life of the occupants, and are visually attractive” (www.idcanada.org ).
Interior Design can cover a variety of disciplines, including residential, corporate/workplace, retail, healthcare, hospitality, public, and institutional design. Designers pay special attention to function, space planning, ergonomics, lighting, and of course the “pretty” surface elements such as colours and fabrics. Interior Designers can be thought of as an “interior architect” and are skilled in the aspects of spatial planning, preparing technical drawings and documents, and can help design and renovate interiors from drawing up the initial floor plans to placing the last decorative accent.
How does an Interior Designer gets to be a certified professional? It begins with 3-4 years of schooling, followed by a minimum of 2-3 years of work experience, and then certified by rigorous examinations facilitated by the professional bodies of ARIDO and IDC. Designers are required to carry liability insurance, participate in ongoing professional development programs, and uphold a professional code of ethics and standards to maintain their credentials.
Interior Designers can be hired for remodels, renovations, redecorating, and new build projects. They often work with architects, trades, and other design professionals to achieve the clients’ goals while following safety standards and building codes. Designers are often involved with planning from the very beginning but can be brought in at any stage of the design and construction process.
The cost of hiring an Interior Designer may seem prohibitive for those on a tight budget, but the benefits are advantageous.
Those who don’t have the time or desire to plan, shop, select, and oversee their project will ultimately profit from hiring an expert. An Interior Designer can prevent clients from making costly mistakes; whether it is with project management, decision-making, or providing savings on products and materials purchased. Designers bring with them an array of professional contacts for trades, suppliers, custom fabricators, and favourite stores. Regardless of the project size and needs, clients often have the option to choose from a variety of services to suit their budget.
If you are considering hiring an Interior Designer know what you want by determining your needs beforehand, and define your style through design and architecture magazine clippings. You can find a Designer through word of mouth, web-based research, professional associations, or trade magazines.
Interview them to review their portfolio, determine that your personalities mesh, discuss your project scope as well as the designer’s fees and process. Most important of all, have fun with the process – your interiors will thank you, and you will have made an investment into the enjoyment and functionality of your space. For the Silo, Ramee Cyr Principal, Ra-me Interior Design www.ramedesign.com
Originally published in print edn. of The Silo December 2013.
Nobody likes to live in a home that is cluttered, messy and full of stuff – but as you and your family accumulate more belongings, it can become easy to end up in this situation and then difficult to get back out of it. However, one of the simplest tricks to living without clutter is to make sure that it’s super easy for you and your family to clean up in the house quickly. We’ve put together a list of great tips that you can follow to ensure that your home can go from chaotic and cluttered to calm and clean in no time at all.
Closed Storage
Having closed storage is a great way to minimize clutter and also ensure that your home is tidy with minimal effort. Everybody likes the look of open shelving when everything on there is lined up perfectly, however the sad truth is that it’s not always very practical or possible to keep everything perfectly tidy and in order. Closed storage, when well thought out, can look just as good if not even better. If you’ve got a lot of stuff, stay away from open shelving wherever possible and use drawers and doors to conceal everything.
Under Bed Storage
Bedrooms, especially kid’s rooms, can quickly become cluttered if they have a lot of things and need constant reminding to tidy up after themselves. However, using beds with built-in drawers underneath makes a great storage space for bedroom clutter, and are easy and accessible enough for kids to clean up after themselves without even putting in that much effort. In an adult bedroom, under the bed storage makes an excellent space for storing shoes or other items of clothing that aren’t worn frequently.
Storage Containers
If you have boxes and boxes full of things that you don’t want to get rid of but barely use, they can take up a lot of room in your home and cause it to be quite cluttered. Investing in a storage container could be a great idea, especially if you don’t have free room at home such as in your shed or garage to store any extra stuff that’s just sitting around taking up room. Solutions for public storage Montreal offer a range of different sized storage containers which you could rent to put your stuff for the amount of time that you need.
Have a Clear Out
Although this might take a day or two to complete, having a full clear out of your home will really pay off. If, like most families, you have a lot of things lying around, sorting through the things and deciding what you do and don’t need is likely to free up a lot more room in your home. Clothing items could be sold on to make more money or given to charity, and any electrical things you don’t need can be listed for sale online, meaning that your clear out could result in a cleaner home and more money in the bank. For the Silo, Dimitry Karloff.
We’d love to hear your video comments about this article. Simply click here– [vidrack align=”right”]
BenQ America Corp., the No.1 DLP® projector brand worldwide, today introduced the Colorific™i500, a completely new way to enjoy immersive entertainment in small spaces. A compact device that combines wireless streaming, short-throw LED projection and rich integrated audio, BenQ’s i500 instantly delivers big-screen entertainment designed for today’s modern, tech-friendly lifestyles. With access to the most popular apps, the i500 opens unlimited possibilities for thousands of movies, shows, apps, games and even live broadcast — all without cables, set-top boxes or streaming dongles.
Cute as a button right? It’s only about 20cm x 9cm or 8″ x 3″
“The i500 smart projector is an entertainment game-changer,” said J.Y. Hu, vice president at BenQ America Corp. “At just 3.3 pounds and 3 inches tall just about the size of today’s tablets, the i500 is a powerful and versatile device for even the tightest spaces. Simply turn on the i500 and you’re ready to stream videos and music wirelessly for the ultimate big-screen experience anywhere.”
Thanks to its short-throw lens, the i500 projects images up to 80 inches from as close as 3 feet from the wall or screen, enabling supersized movies, shows, apps and games in WXGA (1280 x 800) native resolution. Supporting a variety of streaming content, the i500’s Colorific technology features a long-life LED light source rated for 20,000 hours without lamp replacement and is capable of projecting high-definition videos with supreme clarity and sharpness. Its vertical keystone correction means the projector can be placed at an indirect angle without any distortion — perfect for placement on a coffee table. With its contemporary gold finish, it blends in seamlessly with existing décor.
On the other side of the dual-sided device users will find a pair of 5W fine-mesh-covered chambered speakers specially tuned to produce clear voices and rich sound quality without external audio connections. When the i500 is not projecting, it can double as a powerful, portable Bluetooth® speaker system.
The i500 comes out-of-box-ready and maintains its flawless performance with the latest software and streaming apps via over-the-air live updates to provide years of unlimited hassle-free entertainment. It is preloaded with popular streaming services and apps such as YouTube, Spotify, Vimeo, Netflix, Hulu and many others. Also, with available game pad and controllers, the i500 unleashes a universe of heart-pounding games including action/adventure, strategy, role-playing and even first-person shooter games.
The i500 does all of this via wireless LAN with no other connections required, and it can play video or music content from a USB stick or display Excel, Word, or PowerPoint documents without a PC. For even more convenience and versatility, the projector offers a selection of the latest inputs, including HDMI x 1, USB 2.0 x1, USB 3.0 x 1, audio I/O as well as a mic in.
The BenQ i500 is now shipping in North America at a retail price of U.S. $749.
“The Countess of Beverly Hills Mansions” Before Paris Hilton and Kim Kardashian, socialite Dorothy Taylor may have been the first Hollywood celebrity who wasn’t in the entertainment business. She was the ultimate party host and frequent 1930’s scandal rag fodder. Her lovers included Gary Cooper, Bugsy Siegel, George Raft and an Italian count.
Dorothy’s trip to celebrity fame began after she inherited $12 million in 1916, the equivalent of about $275 million today. The first thing she did with her money was divorce her British aviator husband, Claude Grahame-White, and embark on a long party in Europe’s best circles. In 1923, she married Italian Count Carlo Dentice di Frasso, many years her senior. On the outskirts of Rome, the new countess acquired and restored one of Europe’s most famous homes, Villa Madama, that had been designed in the sixteenth century by Raphael. It was later used by Benito Mussolini during World War II for National Fascist Party functions.
While residing in the villa, actor Gary Cooper was doing a movie in Rome and became quite ill. Dorothy took him in and during his recuperation began an intense affair with him under her husband’s nose. Since she and the count were at that point leading separate lives, Dorothy went on with the affair and moved to Hollywood where she purchased a mansion in Beverly Hills. Making friends of some of Hollywood’s most important stars through her Cooper connections, Dorothy called in the best decorators and landscapers and created a luxurious estate that was classic Art Deco filmdom glamour. Dorothy and Cooper eventually went their own ways but remained distant friends. She was always known as the woman who taught Gary Cooper how to dress, making him the most elegant man in Hollywood.
Through her new Hollywood friends, Dorothy eventually rented her mansion to Marlene Dietrich and headed off to search for sunken treasure on the studio-owned schooner, Metha Nelson; Captain Bligh’s ship in the 1935 movie “Mutiny on the Bounty.” Also on the ship was American gangster Bugsy Siegel. Although the trip turned into a disaster when the schooner was tossed violently by 70 mile-per-hour gale winds that split the main mast and destroyed the sails, it was the start of a new affair with Bugsy. She always rejected gossip of her association with Bugsy, instead referring to him as Benjamin to her friends.
In 1947, Dorothy sold the Beverly Hills house to MGM pianist Jose Iturbi, who lived there until he died in 1980. In 1954, Dorothy died of heart failure in a train compartment while she was traveling with George Raft from Las Vegas to Los Angeles after attending one of Dietrich’s performances.
Hand painted murals & mirrored verre églomisé panels.
Once again for sale, the beautifully preserved Spanish Revival estate hasn’t changed much since its heyday in the 1930s when it was featured in “House and Garden.” At approximately 8,000 square feet, it has four bedrooms and five baths on 1.12 acres. The home was built for entertaining with large public rooms and although it looks like wallpaper, the walls are covered in hand-painted murals. In the dining room, the walls are mirrored verre églomisé panels that depict towering palms. There is also a two-bedroom guest house and pool nestled within the mature landscaped grounds. The asking price is USD $26.9 million. Dimitri Velis of Hilton and Hyland in Beverly Hills is the listing agent. For the Silo, Terry Walsh.
‘Star Trek Mansion,’ Featuring Acoustic Innovations’ Most Celebrated Home Theater Design, Now on Market for $35M Featuring Award-Winning Theater Modeled on Bridge of Starship Enterprise, Home is Most Expensive Ever to Hit Boca Raton Market. Photograph: Andy Frame
BOCA RATON, Fla.– May 2014 — The “Star Trek Mansion” in Boca Raton, Florida, is now on the market for a cool $35 million, featuring a much-buzzed-about home theater designed by Acoustic Innovations. Created to model the bridge of the Star Ship Enterprise, the theater is the focal point of the 27,000-square-foot home owned by Marc Bell, managing partner of Marc Bell Capital Partners LLC in Boca Raton. Last year, Acoustic Innovations designed a smaller theater in the home to resemble a military encampment, creating the mood for game enthusiasts to play “Call of Duty” and other Xbox games.
“Acoustic Innovations and Jay Miller did a fantastic job of taking our Star Trek theater vision and turning it into reality. If you can dream it, Jay can build it,” said Bell. “Acoustic Innovations’ attention to detail for every aspect of the project — from the advanced A/V technology to the quality and comfort of the chairs — meant that we were able to create a home theater experience that exceeds anything you’ll find in a commercial movie theater. We’re looking forward to working with Jay and his team on the Star Trek theater and home 2.0, wherever that may
be.”
Winner of a Gold award and Best Architecture award from the Custom Electronic Design and Installation Association (CEDIA) in 2007, the
1,400-square-foot Star Trek entertainment space includes the theater, a bar, and a “ready room” filled with Bell’s collection of props, models,
and drawings from the Star Trek television series, as well as Star Trek and Star Wars movies. Modeled to recreate the bridge from the Enterprise, circa “Star Trek: Next Generation,” the theater even includes motion-activated air-lock doors that “whoosh” when opening and closing.
When the theater was originally completed in 2007, it featured the most advanced high-definition cinema A/V system available. Since then it has undergone three major technology upgrades to keep it on the leading edge, including 3D projection capabilities. In addition to the functional and aesthetic design and d-cor, Acoustic Innovations designed the acoustics both inside and outside the theater, as well as for the “Call of Duty” video game room.
The “Call of Duty” video game room. Get some!
“It’s incredibly exciting to work with Marc on a project, because he is always open to an interesting idea,” said Jay Miller, president, Acoustic Innovations. “A collaborative effort is extremely important on every job we do, and for this project Marc and I clicked very early on how to execute the Star Trek bridge. Now that the house is up for sale, it’s amazing and gratifying to see how the theater has gone viral in the online press; in fact, I’ve not seen anything like it in my 23 years as a specialty theater designer.”
For two decades Acoustic Innovations has been the source for personal theaters, theater seating, fiberoptic ceilings, acoustical panels, and residential noise control solutions. Over this time we have pioneered many of the materials and design specifications used today. Our staff has completed thousands of personal theaters throughout the world and has developed processes to ensure delivery of the ultimate client satisfaction. At every level of cost we blend the science of acoustics with the art of aesthetics. More information is available at http://www.acousticinnovations.com.
The Project: The 980,000 sq. ft. acute care community hospital replaces two aging facilities in the Niagara region and accommodates 375 acute care beds, with associated outpatient and support services.
New Health Care Complex – St. Catharines Site “2oth Century NOT included”
It provides a comprehensive range of clinical services including:
• a cancer centre serving 1,200 patients close to home, relieving them from the stress of travelling to Hamilton or Toronto for treatments
• a longer-term mental health service that includes 53 beds
• dialysis services
• cardiac catheterization services, which provides diagnostic investigation, reduces hospitalizations for heart disease and provides faster local care for residents of the Niagara region
The goal of this project was to provide Niagara Health System with a modern, state-of-the-art, one million square foot building capable of providing one million square feet of care.
In addition to design and construction management, PCL’s [ PCL comprises a family of general contracting companies and is the largest such organization in Canada and the fifth largest in the U.S. CP ]scope of work also included the procurement and installation of more than 25,000 pieces of medical equipment, as well as medical gas, head walls, nurse call system, information technology, audio visual, and security technology.
Some of the many interesting features that set this building apart include construction of the first radiation suites in the Niagara region, an enclosed ambulance bay to provide protection to incoming patients, an interior design that strategically locates departments to minimize clinical travel time by staff, and an exterior design that implements materials indigenous to the Niagara region.
Interior and exterior architectural designs affect patient and staff psychology so why not design accordingly? This ceiling detail of the Walker Cancer Care Treatment Room ceiling reveals the care and consideration that went into the hospitals designs. CP
Architectural
• Main Street feature wall using a combination of indigenous and complementary stones that tell a story of the geological formation of the Niagara Escarpment.
• Use of structural elements in the form of a tree at the main entry and cafeteria to create the canopy.
• First operating rooms in Canada to use Corian wall finishes.
• Integrated interior finishes and way finding system,using landmarks to help visitors and patients locate themselves in the facility.
• Enhanced use of natural light to infiltrate deeper into the building, with particular attention to patient spaces.
• An acoustical design at the building envelope to mitigate and isolate noise generated by a nearby train corridor.
Structural
• Blending structural elements with architectural finish and spectacle.
• Strategy of a structural grid system to maximize open spaces and floor to ceiling height.
• Foundation system and MRI inertia slab to address vibrations created by train traffic and a nearby machine stamping plant.
• Post Disaster design to address potential seismic event, to allow the facility to operate during and after as a relief centre.
• Use of cast-in-place elements to allow equipment flexibility.
Mechanical/Electrical
• Pandemic containment capability to deal with infectious outbreaks and disasters, allowing the facility to isolate building sections and departments.
• Building automation system, fully integrated with building elements and equipment to monitor and ensure optimal building performance.
• Back-up and dual power systems to ensure fundamental building and medical systems remain available and functioning at all times, including integration with the building automation system, to allow targeted load distribution to non fundamental systems to become available as required.
The Operating Theater. It’s understandable if you think that this is a set from Star Trek-
Sustainability
• The project is targeted for LEED® certification. As part of the construction and design strategy, the project team developed several innovations and elements for a significant improvement of the target to LEED® Silver certification – from 26 to 35 points.
• Incorporated an energy efficient lighting strategy using natural lighting as much as possible, as well as the broad use of occupancy sensors and low energy lighting systems.
• Integrated and efficient cooling and heating systems, and an optimized building envelope system that helps to reduce greenhouse gas emissions.
• The overall energy strategy resulted in the Energy Model that realizes an energy savings of 46% relative to the Model Energy Code for Buildings, which is expected to produce savings to the client in excess of $1 million annually.
• Use of native and hardy plant species and an integrated storm water management program, including irrigation and water features to eliminate city water use for landscape elements.
A look at the state-of-the-art radiation treatment facility.
aspen FR10 Features at a Glance:
I realized I needed to do something about it and fast. So I 
Dorothy’s trip to celebrity fame began after she inherited $12 million in 1916, the equivalent of about $275 million today. The first thing she did with her money was divorce her British aviator husband, Claude Grahame-White, and embark on a long party in Europe’s best circles. In 1923, she married Italian Count Carlo Dentice di Frasso, many years her senior. On the outskirts of Rome, the new countess acquired and restored one of Europe’s most famous homes, 
