Tag Archives: engineering

Art

Superb Watch From Raketa Uses Vintage Metal From Ekranoplan Landing Craft

June 28, 2023 The Silo Leave a comment

The Raketa Watch Factory launches a new tool watch dedicated to the Lun-class Ekranoplan: a Soviet era hybrid machine — half ship, half plane — unlike anything else in the world.

Legendary soviet achievement

Part ship & part plane, the Lun-class Ekranoplan was built in the early 80s by the Soviet Union as an experimental coastal defence vehicle. It can claim to be one of the most extraordinary machines ever built by mankind. It combined the best characteristics of a ship and that of a plane: it could carry as much cargo as a ship and fly as fast as an airplane at speeds of up to 500 km/h. It flew over distances of up to 2,000 km using lift generated by the “ground effect” acting on its large wings when about 4 metres above the surface of the water. This enabled the Ekranoplan to fly undetected by radars.

The name “Lun” was chosen because it comes from the Russian word for “harrier”, a bird which characteristically hunts by flying silently low over open ground.

A remnant of the past

The only Lun-class Ekranoplan ever built lies today on a beach of the Caspian sea near the city of Derbent (Russia) as a lonely reminder of past achievements. With its gigantic size, unique hybrid characteristics and quirky design, the Ekranoplan is a testimony to the incredible originality of Soviet-era engineering. Even now, after almost half a century, it looks incredibly futuristic.

A watch as testimony to the Ekranoplan Lun

The Raketa Watch Factory has always been inspired by incredible human technical achievements. It has therefore designed and manufactured a tool watch as testimony to the Ekranoplan. Raketa also hopes this will attract more attention to the Ekranoplan, and thus contribute to saving it.

Especially for this model, Raketa developed a new stainless steel case and metal band: its sturdy design corresponds to the looks and spirit of the Soviet-era Ekranoplan. The Raketa “Ekranoplan” watch is directly linked to the Lun-class Ekranoplan:

– The insert of the rotating bezel is made from a piece of metal from the Lun-class Ekranoplan, officially given by the city of Derbent which is in charge of safeguarding the Ekranoplan;

– The design of the compass markings on the bezel is directly inspired by the design of the compass on the control panel in the cockpit of the Ekranoplan;

– An embossed image of the Ekranoplan is printed on the dial.

The back of the watch reveals the beautifully decorated 24-hour automatic movement which is entirely produced by the Raketa Watch Factory in Saint-Petersburg.

The Raketa “Ekranoplan” watch model is limited to 500 pieces.

Each watch model is complemented with a leather strap. The model is also available as part of a Gift set which includes the Raketa “Ekranoplan” watch model with stainless steel bracelet, an additional leather strap and a 1:400 scale model of the Lun-class Ekranoplan.

The price

The cost of the watch is 1.667 EUR (without VAT) $2,410.08 CAD at time of writing. The cost of the Gift set is 2083 EUR (without VAT) $3,011.52 CAD at time of writing. For the comfort of customers, Raketa watches are delivered worldwide free of charge by DHL directly up to their front door.

The insert of the rotating bezel is made from a piece of metal from the Lun-class Ekranoplan.

Specifications

Factory:	Raketa Watch Factory (Saint-Petersburg)
Movement:
Calibre:	2624
Functions:	Automatic
Number of jewels:	24
Testing positions:	4
Average rate (s/d):	-10+20
Average running time (h):	40
Frequency/hour:	18.000 / 2.5Hz
Bi-directional automatic winding	Yes
Decoration:	Nanocoating Neva waves Print
Case:
Material:	Stainless steel
Material of the bezel insert:	Metal from the Lun-class Ekranoplan
Size:	41,6 mm
Front glass:	Sapphire
Back glass:	Mineral
Water resistance:	20 АТМ
Hands:	Superluminova
Dial:	Superluminova
Strap/bracelet:
Material:	Stainless steel Genuine leather
Width:	22 mm
Sex:	Male

For the Silo, Lera Komolova. Photos: Lera Komolova

RAKETA “EKRANOPLAN”

Entre ciel et mer !

La Manufacture horlogère Raketa lance une nouvelle montre spécialisée qui est dédiée à l’Ekranoplan Lun : un appareil hybride de l’ère soviétique – mi-avion, mi-bateau – absolument unique en son genre.

Un exploit légendaire de l’époque soviétique

Construit par l’Union soviétique au début des années 1980 en tant qu’engin expérimental de défense côtière – mi-avion, mi-bateau – l’Ekranoplan peut être considéré comme l’une des machines les plus extraordinaires jamais créées par l’homme. L’Ekranoplan réunissait les meilleures qualités d’un navire et d’un avion : il pouvait déplacer autant de cargaison qu’un bateau et pouvait voler aussi vite qu’un avion en atteignant une vitesse de 500 km/h. Il volait à des distances allant jusqu’à 2 000 km grâce à “l’effet d’écran” qui se formait sous ses immenses ailes à environ 4 mètres au-dessus de la surface de la mer. Ceci lui permettait de se déplacer sans être repéré par les radars.

Son nom « Lun » se traduit du russe comme « le busard », et non sans raison, car cet oiseau de proie est connu pour sa chasse en vol silencieux à basse altitude.

Un témoin du passé

Le seul Ekranoplan Lun jamais construit se trouve aujourd’hui sur une plage de la mer Caspienne près de la ville de Derbent (Russie), comme un rappel solitaire des exploits passés. Sa taille gigantesque, ses caractéristiques uniques et son étrange design témoignent de la force et de l’originalité de l’ingénierie soviétique. Encore aujourd’hui, presque cinquante ans après sa conception, il a l’air extrêmement futuriste.

Une montre en hommage à l’Ekranoplan Lun

La Manufacture horlogère Raketa a toujours été inspirée par les plus grands exploits techniques humains. Elle a donc produit une montre spécialisée en hommage à l’Ekranoplan Lun. Raketa souhaite aussi attirer l’attention sur l’Ekranoplan Lun et contribuer ainsi à sa préservation.

Un nouveau boîtier et bracelet en acier ont spécialement été conçus pour ce modèle : leur design rugueux et viril correspond à l’esprit de l’Ekranoplan soviétique. Le modèle Raketa “Ekranoplan” a plusieurs liens avec l’Ekranoplan Lun :

– l’insert de la lunette tournante est fabriqué à partir d’un morceau de métal de l’Ekranoplan Lun, officiellement transmis à la Manufacture Raketa par la ville de Derbent (qui est en charge de la préservation de l’Ekranoplan) ;

– le design des signes de boussole sur la lunette est inspiré de la boussole du tableau de commande situé dans le cockpit de l’Ekranoplan ;

– une image embossée de l’Ekranoplan est imprimée sur le cadran.

Le fond du boîtier permet de contempler un mouvement automatique à 24 heures Raketa, magnifiquement décoré et entièrement créé par la manufacture horlogère Raketa de Saint-Pétersbourg.

Raketa “Ekranoplan” est une édition limitée à 500 pièces.

Chaque montre est livrée avec un bracelet en cuir supplémentaire. Le modèle est également disponible dans un coffret cadeau comprenant la montre Raketa “Ekranoplan” et son bracelet en acier, un bracelet cuir supplémentaire et la maquette de l’Ekranoplan Lun à une échelle de 1:400.

Prix

Le prix est de 1 667 EUR HT pour la montre seule et de 2 083 EUR HT pour le coffret cadeau. Pour le confort de nos clients, les montres Raketa sont livrées gratuitement dans le monde entier par DHL jusqu’à leur porte d’entrée.

Spécifications

Manufacture :	Manufacture de montres Raketa (Saint-Pétersbourg)
Mouvement :
Calibre:	2624
Fonctions :	Automatique, 24 heures
Nombre de rubis :	24
Positions de reglages :	4
Marche moyenne (s/j) :	-10+20
Réserve de marche moyenne (h) :	40
Fréquence/heure :	18.000 / 2.5Hz
Remontage automatique bidirectionnel :	Oui
Décoration :	Nanorevêtement Côtes de NevaImpression
Boitier :
Matériau :	Acier inoxydable
Matériau de l’insert de la lunette :	Métal de l’Ekranoplan “Lun”
Diamètre :	41,6 mm
Glace côté cadran :	Sapphire
Glace arrière :	Minéral
Etanchéité :	20 АТМ
Aiguilles :	Superluminova
Cadran :	Superluminova
Bracelet :
Matériau :	Acier inoxydableCuir véritable
Largeur :	22 mm
Sexe :	Masculin

Reviews

Geology Studio’s Open 45 Credenza Optimizes Streaming & Vinyl Listening Experience

June 22, 2023 The Silo Leave a comment

“I was on a mission to figure out how to help people like myself engage with their music collections. This piece is the result of that effort,” says designer Adam Friedman.

Sci-Tech

World First- Venturi’s Hyper-Deformable Lunar Wheel Presented At Paris Air Show

June 20, 2023 The Silo Leave a comment

Earlier this week, Venturi Group presented its latest invention at the international Paris Air Show in Le Bourget, France: a hyper-deformable lunar wheel. Venturi Lab designed and manufactured the wheel using materials it created. The Venturi wheel is a world first.

A turning point in the history of the space industry, Venturi has reinvented the wheel. Engineers, chemists and physicists at Venturi Lab in Fribourg, Switzerland have created a unique hyper-deformable lunar wheel.

The wheel will be used on Venturi Astrolab’s FLEX rover, a vehicle that will be deposited on the Moon in 2026 by Space X’s Starship rocket and initially used to transport and deploy payloads.

In the past, with the exception of the Apollo missions, space exploration vehicles have always been equipped with rigid wheels. The Venturi wheel, however, is highly deformable while remaining long-lasting and robust. From 2026, when the FLEX rover is put into service at the lunar south pole, where extreme temperatures (-90 to -230°C) prevail, the four wheels supporting the two-tonne vehicle (payload included) will warp in order to absorb ground irregularities as the FLEX travels at 20 km/h. The wheels will need to perform over at least 1,000 kilometres and resist strong radiation from the south pole.

Features of the Venturi wheel include:
– an exceptional diameter of 930 mm
– a complex system of 192 cables that act as spokes
– a tread made flexible by a newly invented material
– an outer rim equipped with springs

This breakthrough technology, based on unique materials, is equal in importance to the arrival of the rubber, and later pneumatic rimmed tyre in the 19th century.

NASA has selected Venturi Astrolab to test and analyse the Venturi wheel at the NASA Glenn Research Center in Cleveland and the NASA Johnson Space Center in Houston.

ABOUT VENTURI
Since 2000, the Venturi Group has specialised in the design and manufacture of high-performance electric vehicles. Whether through world records, expeditions on hostile terrain, the creation of the first electric sports car, the development of innovative vehicles or its involvement in the Formula E World Championship, the Venturi Group embodies and demonstrates all the capabilities of the electric vehicle on 2 or 4 wheels. Since 2021, Venturi Lab is part of the Venturi Group. The company invents, studies, designs and manufactures mobility solutions capable of handling the extreme environmental conditions found on the Moon and Mars. In 2026, Venturi Astrolab’s FLEX rover – for which the Venturi Group will have designed and manufactured innovative technologies resulting from disruptive innovations – will be in operation on the Moon.

ABOUT VENTURI ASTROLAB
Venturi Astrolab, Inc (Astrolab) is on a mission to advance humanity to the next horizon by designing, building and operating a fleet of versatile rovers for all planetary surface needs. Comprised of a highly specialised team of former NASA, SpaceX and JPL engineers, Astrolab is dedicated to providing adaptive mobility solutions essential to life beyond Earth. The team has leading experience in terrestrial and planetary robotics, electric vehicles, human spaceflight and more. Astrolab’s extensive experience and strategic partnerships with a wide range of world-class institutions, including the electric vehicle pioneer Venturi Group, allow for the most reliable, flexible and cost-effective lunar and Mars mobility offerings. The company’s headquarters are located in Hawthorne, California.

Sci-Tech

New Lunar Rover Will Be Largest Ever And Includes Disruptive Innovations

May 31, 2023 The Silo Leave a comment

Recently, H.S.H. Prince Albert II of Monaco visited Venturi Group’s Monegasque headquarters.

photos: Venturi/Bebert
Welcomed by the Group’s President, Gildo Pastor, the Sovereign was invited to take a historic first look at the lunar rover “FLEX”, developed by Venturi Astrolab (USA) in collaboration with Venturi Lab (Switzerland) and Venturi (Monaco).

FLEX will be the largest and most advanced lunar vehicle ever made.

It will be landed on the surface of the Moon by American firm SpaceX in 2026. Fans of Canada’s robotic space arm Canadarm take note: the lunar rover includes its own ‘in house’ designed and built robotic arm.

Since 2000, the Venturi Group has specialized in the design and manufacture of high-performance electric vehicles. Whether through world records, expeditions on hostile terrain, the creation of the first electric sports car, the development of innovative vehicles or its involvement in the Formula E World Championship, the Venturi Group embodies and demonstrates all the capabilities of the electric vehicle on 2 or 4 wheels.

Since 2021, Venturi Lab is part of the Venturi Group. The company invents, studies, designs and manufactures mobility solutions capable of handling the extreme environmental conditions found on the Moon and Mars. In 2026, Venturi Astrolab’s FLEX rover – for which the Venturi Group will have designed and manufactured innovative technologies resulting from disruptive innovations – will be in operation on the Moon. For the Silo, Fabrice Brouwers/Venturi.

ABOUT VENTURI ASTROLAB, INC.
Venturi Astrolab, Inc (Astrolab) is on a mission to advance humanity to the next horizon by designing, building and operating a fleet of versatile rovers for all planetary surface needs. Comprised of a highly specialised team of former NASA, SpaceX and JPL engineers, Astrolab is dedicated to providing adaptive mobility solutions essential to life beyond Earth.

The team has leading experience in terrestrial and planetary robotics, electric vehicles, human spaceflight and more. Astrolab’s extensive experience and strategic partnerships with a wide range of world-class institutions, including the electric vehicle pioneer Venturi Group, allow for the most reliable, flexible and cost-effective lunar and Mars mobility offerings. The company’s headquarters are located in Hawthorne, California.

Sci-Tech

Audio-Technica Wowed by Response to Limited-Edition Release of “Sound Burger” Portable Turntable

January 23, 2023 The Silo Leave a comment

To commemorate the company’s 60th anniversary, Audio-Technica released a limited-edition Sound Burger portable turntable this past November – four decades after its original debut. A-T never imagined the overwhelming response the release would generate.

That limited-edition AT-SB2022 retro red Sound Burger sold out in a matter of days worldwide – faster than anyone projected.

The Sound Burger will return in spring 2023.

Inspired by the response and acknowledging the loud chorus of fans who were not able to purchase the limited-edition model (but were still hungry for Sound Burgers), the company has announced that the Sound Burger will return in the spring of 2023.

“The response to the 60th anniversary limited-edition model of the Sound Burger portable turntable was nothing less than extraordinary,” said Gary Boss, Director of Marketing. “We heard loud and clear the frustration of those who hoped to buy one of these turntables but were unable to do so. While the new model coming in the spring will not feature the 60th anniversary numbered badge, color and packaging of the limited-edition version, it will be more widely accessible. We hope Sound Burger fans will be just as excited about this new model and that it will inspire the next generation of analog enthusiasts.”

Love at first listen, the Sound Burger is an affordable entry-level machine in terms of both features and price. For those who are new to vinyl records, it is a doorway to a deeper knowledge of analog music.

Thanks to its Bluetooth® connection and compact, lightweight design, the Sound Burger is the perfect partner for parties, picnics, or condensed living spaces. It easily connects to Bluetooth headphones or speakers for up to 12 hours of wireless record listening.

The Sound Burger offers high-quality sound reproduction with a belt-drive system that plays 33-1/3 and 45 RPM records. To achieve both portability and stability, the tonearm employs a dynamic balance system in which stylus pressure is applied via a spring. In addition, a high-precision DC motor maintains stable rotation. Accessories include a 45 RPM adapter, RCA audio cable (3.5 mm male to dual RCA male), and USB cable for charging (USB Type-A / USB Type-C™). The stylus on the Sound Burger can be upgraded with the higher quality ATN3600L (sold separately).

Sci-Tech

Canada Space Agency -How Space Affects Our Body

January 8, 2023 The Silo Leave a comment

Living in space has significant effects on the human body. As we prepare for journeys to more distant destinations like Mars, humankind must tackle these risks to ensure safe travel for our astronauts.

Have a look at this nifty infographic from the CSA.

Sci-Tech

Here Is How Concrete Contractors Adapt To Canada Winter

January 2, 2023 The Silo Leave a comment

Concrete workers are unsung heroes. Their work doesn’t end, even when winter hits and the temperature drops.

Unlike people who work in the warmth of an indoor space, they may not have the luxury of avoiding the harsh weather.

Without the right precautions, they may suffer from problems such as hypothermia, frostbite, or trench foot. The wet weather can also increase their risk of injury. If the weather is extremely harsh, then work can be called off for safety reasons.

However, workers who are trained and experienced to work in cities that experience colder climates usually adapt well. For example, if you need someone to help you with concrete cutting in Calgary – then you can easily find a reputable and professional locally owned and operated company that’s been serving clients in cold climates for decades.

Here are a few ways concrete contractors adapt to the winter:

#1 They Pay Attention to the Weather Forecast

When working outside, contractors pay attention to the weather forecast. They identify potential weather-related issues so that they can prepare in advance. They also try to use daylight to their advantage and have artificial light to help if necessary.

#2 They Protect Their Body

When working in the cold, concrete contractors usually wear multiple layers. Some also wear insulated clothes, which shield the skin from moisture, and thermal undergarments. The outer layers are waterproof and quickly removable. On their heads, they may wear a wool liner under their hard hat.

In the winter, contractors may take more short breaks to warm up their bodies or their clothes. They may also try to get the most work done during the warmest part of the day. The buddy system also comes in handy during the winter, where partners can look out for each other.

#3 They Protect Their Hands

Gloves are especially important in the winter. Many contractors prefer leather gloves because they’re more resistant than cotton gloves, which can get damp. When the temperature drops to less than 20 C, they may switch to mittens. However, mittens aren’t always practical for work.

#4 They Protect Their Feet

Waterproof boots are a must in the winter. Contractors may treat their leather boots to waterproof them further and wear insulated socks. They may also wear multiple layers of socks, with the outer sock being the largest size. Some carry extra socks in case they need to work outdoors for longer periods.

#5 They Protect Their Equipment

After donning the proper equipment, concrete contractors also take precautions with their equipment. They avoid using cold tools because this can lead to problems. Instead, the tools are warmed up before they can contact concrete.

Tools with metal handlebars are treated with extra caution. Metal handles are covered with an insulating material to protect workers. Usually, contractors only use equipment that’s designed to be handled with gloves or mittens. Contractors may also use powerful tools that are integrated with dust collection to avoid cutting wet.

These are a few ways concrete contractors adapt to the winter when doing outdoor work. With the right precautions and appreciation from their clients, they get the job done correctly and safely.

Culture

The Revolutionary Fairlight CMI Music Synthesizer

October 12, 2022 The Silo Leave a comment

He listened to Mike Oldfield. He saw the pictures on the albums and he read about ‘this thing called a Fairlight’. Which raised Klaus’ curiosity about this ‘Computer Instrument’. Fellow keyboardists told him it was a mission impossible, getting your hands on one. But Klaus managed to find the holy grail…

‘To me, It’s still fresh. I can use the Fairlight to create sounds no one’s ever heard before.’

”I was lucky enough to find a Series II, back in 2010. It’s quite a historical piece, for it used to belong to Synthesizer Studio Bonn, one of the only two Fairlight retailers in Germany. They bought it in 1982. It was their demo machine and It was kept in their shop until 1999. They went bankrupt, and the Fairlight was sold to a synth collector, who went bankrupt as well. He had to sell a lot of his equipment, including the Series II. I got it for a good price. But I do hope I won’t be the third one to go bankrupt.”

Klaus Himmelstein has been a music and science teacher on several German international schools for about twenty years now. He developed a special interest in electronic music, but originally he is a classically trained violin player. ”That’s how I started, at the age of 8. My parents took me to violin lessons, because they discovered I have perfect pitch hearing. I really love to play the violin and I still play it. Through the years, I got more and more interested in electronic instruments.”

Green screen, big box

”I remember getting my hands on a Yamaha DX7 for the first time, when I was about 12 years old. That was in 1986. I didn’t know what any of these knobs were for. I tried out the presets and I tried to tweak them, to get some other sounds out of it. Around that time period, I also heard about the Fairlight for the first time. I listened to Mike Oldfields’ albums and I read he was using a ‘Fairlight computer’. So I thought: ’What the hell is a Fairlight computer?’ And then, I figured out it was this funny machine with this keyboard and this green screen and a big box, pictured on some of his albums.”

He bought his first synth in 1991. ”A Roland D-5. Not to be confused with the famous D-50. The reason I bought it was because it is multitimbral. I already had an Atari ST computer. I used this set-up for making my first compositions. And, around that time, I started asking other keyboard players about the Fairlight. Some people didn’t know anything about it. But the people who knew about it, they’d be saying things like: ’Oh boy, that’s the holy grail…’, ’15.000 Deutsche Mark’, ’You won’t get your hands on one’ or ’That’s only for the big studios’. By the end of the nineties, Klaus had built himself quite a studio with a decent amount of vintage synthesizers. ”I started looking on eBay, checking for Fairlights. I’ve learned there are two types of Fairlight-ads: either the refurbished machines which cost a fortune, or just crap.”

Closing the deal

In 2010, an acquaintance of his – the guy from RetroSound, who publishes videos of pretty much every vintage synthesizer you can think of – notified Klaus there was a Fairlight for sale. “He knew I was looking for one, through my posts on forums. So one day, he sent me an e-mail. He knew there was one for sale, somewhere in the Eiffel area. A Series II, not in perfect condition, but good enough. He offered to put me in touch with the seller.

So, in the end, I went to this guy, checked it out, talked about the price and closed the deal. It was pretty easy going. I picked it up myself, for I don’t trust companies like UPS and DHL too much handling valuable packages. I had a huge car back in the day, a station wagon. I put lots of cushions and blankets in the back of the car. I wrapped it all up and drove back to my studio, which was located in the city of Münster. I set it all up and after that, people didn’t see me for quite some time, for I was in the studio all of the time.

I went through all the floppy disks. They contained a large collection of samples from Synthesizer Studio Bonn. They made their own samples, their own sounds. It was used for demo sessions. I checked out all the sounds; quite some unique stuff in there.”

Nothing like the real thing

”I was always fascinated by its sound. That was one of the reasons I wanted to have one. Not just for collecting purposes. I’m not treating it like some piece of history that sits in my studio, like some precious artefact, being polished every day. I really want to use it for making music.” Of course, it took some getting-used-to. Klaus: ”When you start to work with it, you’ll probably find out it’s quite difficult. For instance, the light pen isn’t as accurate as you think it might be; no drag ’n drop, no pull-down menu’s. But in the end, after a couple of days, I’ve found my way around it.

I also figured out, and this is a thing I learned from other users as well: after two or three hours working with the light pen, your arm gets really tired. And that CRT monitor, that green screen compared to todays monitors.… It isn’t too comfortable. But that sound, it makes it all worth while. I think the percussive sounds are the best in the world. And it’s that 8-bit sound… I don’t know why exactly, but I think it’s just the best. It’s unique. You don’t get that particular sound out of todays software. For instance, Arturia’s CMI V, it’s really nice, it’s a good reproduction. But if you want that original particular sound, there’s nothing like the original Fairlight CMI.”

Warm community

”I bought it back in 2010 and I have been using it ever since. It’s still in quite good condition, except for the CRT-monitor. It’s a little bubbly and not quite clear around the edges. But furthermore, the light pen is still working, one of the floppy drives still works, as well as the 8 voice cards. At the age of almost 40 years, it’s still a good machine. Together with Jean-Bernard Emond from France, I’ve made some modifications. For instance, we’ve replaced on of the floppy drives with an SSD-drive. Peter Wielk helped me out with one of the voice cards. I had a dead one. He had one in Australia, so he sent it to me.

I have two Emulators, and one of them just serves as a box of spare parts. I figured out there aren’t too many people familiair with repairing an Emulator. And it’s very, very difficult to get spare parts for it. With the Fairlight on the other hand, there’s a well grown community, pretty much world wide. You can get parts from France, from Australia, from the UK… There’s always someone somewhere in the world, with a great love for the instrument and lots of knowledge, who can help you out with any issue you might have.”

Inspirators

“In my studio, there are at least 25 keyboards and a whole lot of modules and other stuff. The Fairlight is a part of ’the orchestra.

I’m a big fan of Tangerine Dream, that is to say: their early work. Everything after about 1989 began to sound like pretty much everything else. They used cutting edge technology. But the funny thing is: they never used a Fairlight. According to Edgar Froese, they used a Synclavier, and Emulators. Their music comes close to what inspires me. Some people are comparing some of my work to Tangerine Dream. Others are saying it reminds them of Jean-Michel Jarre. The perception is quite different. I’m totally happy when people like my tracks. If they don’t? That’s fine with me. I’m working on my ideas and I’m enjoying the proces. That’s it. Sometimes, I get involved in some recordings, I made a couple of jingles for radio commercials and I once made a small movie score. Sometimes, I play keyboards and violin in bands. I’d prefer doing a little less teaching and a little more music production. The good thing about being a teacher: it’s a steady job. The bad thing about being a musician on the free market: you’re never sure of income. I prefer the more secure way. Teaching music actually is a lot of fun. Recently, we performed a few pieces with some students. I love teaching music to kids. But, I don’t take many of my synthesizers to school. My Moog Rogue is the only one I bring from time to time. They can tweak on pretty much every knob or slider; it doesn’t go out of order. But I’m not bringing the Fairlight to school. I don’t want to transport it too often.”

Final thoughts

“The Fairlight CMI, it’s a particular part of history. It has integrated sampling into modern music. Without the Fairlight, things would have happened totally differently. Back in the early 80’s, it was the latest thing to go on, the latest way to produce new kinds of music. I love that particular sound. For me, it’s still up to date. It’s not old-fashioned, it’s not vintage. For me, it is still fresh. In my opinion, I can use the Fairlight – as well as the Emulator – to create new and fresh sounds that have never been heard before. I’m convinced of that.” For the Silo, Mirjam van Kerkwijk. Read more about the Fairlight via For The Love Of The Fairlight . Have a fun Fairlight story to tell? Contact Mirjam at mirjam@fortheloveofthefairlight.com.

Listen on Soundcloud

Reviews

This Kick Scooter Converts From Backpack To Longboard

June 10, 2022 The Silo Leave a comment

Kick scooter, pronounced ‘geek scooter.’

Kick scooters are gaining popularity in many populous urban and suburban areas worldwide. As Europe leans toward sustainable mobility, more and more creative ideas are addressing the issue of daily commuting. Designed and engineered in a home garage in Ljubljana, Slovenia, the OLAF Kick Scooter is one such attempt to alleviate the ‘last-mile’ problem.

Engineer Bostjan Zagar and his father developed an open platform kick scooter, OLAF Urban, that can carry any bag or backpack.

A unique feature is that if used with the provided OLAF backpack, the scooter itself is a backpack, and if the handle is folded, also a longboard.

Jure Lozic, designer of Musguard – rollable bike fender, calls the folding mechanism “an engineering marvel, simple and effective”. Bostjan owns a patent and hopes it will take him from A to B, where B is mass production. Slovenia has ample production capabilities, so an eventual goal would be global manufacture.

After almost three years of research and development, Zagar was confident enough to start crowd funding at Kickstarter.

To broaden the odds of success, he implemented the same folding mechanism to an existing concept of carry-on kick scooter, OLAF Business. Now you really can cross the Atlantic with a kick scooter. “It’s the coolest carry-on!”

Transportation

Porsche 928 auto was machine with personality and speed

August 31, 2021 The Silo 1 Comment

Machine Intelligence

Let me start this article by sharing with you my own observation about the nature of intelligent mechanical life: EVERY machine I ever interacted with exhibited a distinct personality. After all, they’re really analog information processors, aren’t they? Like transformers, only not quite so … animatronic. Even so, they do have a machine “spirit”. Some docile and some down right malevolent.

From my first car, the ‘51 Chevy Deluxe, I inherited from my Gramma Hilda, through my ‘63 Chevy Impala SS dual quad 409, to my Deuce and a half water trucks, my Peterbilts (now there’s some evil shit) to my 60 Egg Sport Fish and 54 Bertram Sedan, each had it, and it made itself known immediately.

Acquiring “Black Beauty”

My demon possessed, assassin “business” associate, King, from early days in Seattle commercial real estate, came to my office in December of 1979. He asked me if I wanted a repo Porsche Rainer Bank hooked. I told him: “The only Porsche I’d want is a Black on Black Euro 928 5-spd with Yellow tinted windows.” His jaw hit the floor. He grabbed me out of my chair and dragged me out the door and said “We’re goin’ for a ride!”

We went to the Bank’s repo yard, and all I saw as I walked through the gate was Black Beauty, crouched there like a cat laying in wait exactly as I described. I grabbed the keys from the yard manager, and told him I’d call him later. Bob and I rolled out the gate and warmed her up a little before BURYING IT! She obviously had issues on the front left. I pulled off, and looked . . . shit– a screwed up brake caliper. We stopped at a pay phone [yeah . . . this is an ancient tale], called the yard manager and told him the issue. I also told him I wanted the car and would give him less than the trillion dollars they wanted. He told me to leave a check for the half trillion at the branch and he’d bring the title, and that my branch manager would handle transferring it.

First Personality Appearance

I dropped Bob off at the Yard, and took the car to the Porsche Dealer in the U-District. Told the tech what I thought, and he confirmed it when he got her on the lift. I waited in the customer concierge room for half an hour. The tech came out and told me that the work was completed. He said, “what’s with that crazy thing? I thought she was going to hop off the damn lift.” I shrugged and drove her home. My future ex-to-be couldn’t climb into the 928 fast enough!

The author’s future ex-to-be. “I always liked those toes!” photo courtesy of the author

Early Life with Black Beauty

Me and this car? It was literally love at first sight. The first attraction was an instinctual thing: I am an aeronautical/astronautical engineer and looking, touching and feeling her I had it figured out. The 928 was an engineering masterpiece. A work of art.

The next attraction was the sound of the engine exhaust while she ran. (After I smogged the car, she received 3” stainless Borlas with electric cut outs). Then, the car became the epitome of ssssmmmmoooottthhhhh. Readers, they are fucking smooth.

And quick- I drove her for a year and she wiped the deck with anyone who’d stand up. After getting tons of shit talk from everyone who raced against it (not quarters but measured mile rolling starts on the I-5 Express Lane Underpass), I pulled everything in her that didn’t make it go forward … interior, carpets, headliner … everything.

The First Time She Flew

My buddy, Johnny Roselli, worked for Lake Union Air Service flying turbine otters out of Lake Union to Victoria BC and back . . . “The Sewer Tour.” While talking one day at Beth’s Café, we ended up together on the Evergreen Point Floating Bridge where we walked a measured mile in the center span from Juanita to the U of Washington turn out.

I spray painted a vertical line on the side curtain along the bridge deck at the 0’-pt and 5280.0’-pt. The next morning, at 0500, my little brother was riding as an observer with a second stop watch and we rolled out of the toll gate at Juanita and headed up the hill to the bridge.

I hit 145 mph (233.3 kph) on the clock by the time I started down to the 0.0 marker. Johnny was doing 2-min turns in his turbine Otter directly above the road bed and dropped a wing and dove down along side. He was all set to film from 50’ (15.24 meters) above ground level. [Uhhhh . . . and you didn’t get arrested . . . hmmm]

Him in the plane, me in the 928

We were joining up window to window right at 0.0. [Later, the FAA shithead investigating this “maneuver” had an absolute fucking hemorrage and pulled both our pilot licenses, suspend John for a month]. I blew by him like he was standing fucking still. His airspeed when I went buy was 120. I beat him to the 1.0 mark even when he was spooled all the way up and with his throttle buried in the panel.

The authors aerodynamically clean 1979 928. aka “Black Beauty”. photo courtesy of the author.

Later, at the J&M Café, Johnny said he’d never seen anything like it. When we compared the clocks the average was 183 mph (294.5 kph). Gears man! Gears! By the way, an aerodynamically clean 928, no rear spoiler and a reinforced chin strap has a V2 right at 183. The nose lifts, it wants to take off, and there’s no fucking where to go.

V1 and V2 Rockets - Engineering and Technology History Wiki — The WW2 V2 rocket.

I never considered ever selling her and even if I had that couldn’t have happened because she went out in a fiery glory. Burned to the hubs when a hard fuel line ruptured underneath. I fucking cried. I’m not joking. Her loss was unfathomable and what else could I do but cry for her?

Life with Black Beauty

After writing this account I talked with my brother Tim, a retired Cop in Anacortes. He was the was the observer timing the run and talking to Johnny over a walk-n-talkie. Tim, reminded me that there were all sorts of wild stuff that went on with that car.Stuff that somehow I forgot about: Mechanics refused to work on her … she would do all kinda crazy shit, like dance off the rack when I’d walk by, quiver when they touched her. Weird right? Tim even refused to ride in her for a long time, “cuz she made noises at him.”

Evenings in Windermere Circle

The author and the beauty. photo courtesy of the author.

I used to go down into my garage every night, late, and just sit in front of her hood and look at her, five maybe ten minutes. It was a total love affair between that machine and me. When I’d leave to go to bed, I’d always walk around to her backside, run a gloved hand across and along her rear end to caress her right beneath the gap in the hatch. It was nutty, but I could feel the car settle, ever so slightly, a couple thousandths, from the left rear shock to the right.

When I stepped through the garage door to walk back up into the house, I would always, every time, hear her exhaust system … “clink” … and as I closed the door, I’d hear her fuel accumulator gurgle. I’m not fucking kidding. This beautiful shiny black thing would say good night to me every night. For the Silo, Christopher O’Leary.

Sci-Tech

Serbia’s Custom Hi-Fi Scene Rising

August 10, 2021 The Silo 1 Comment

You may not know it yet, but Serbia is an audiophile hotbed and we are doing our duty to help firmly plant the hi-fi flag in Serbian soil.

There are so many intriguing and fresh designs from this European Union applicant and united Serbian manufacturers of Hi-Fi equipment now offer world-wide production of unique custom devices at the customer’s request.

In Trstenik, Serbia , the headquarters of manufacturer Supreme-Analog regularly hosts presentations of the hottest gear in the Serbian HiFi scene with many first time showings of new speakers, electronics, cables, tonearm, head phone amplifiers etc. A number of up and coming Serbian companies have participated already and include: Auris audio and Trstenik (Tube electronics and tube headamp, tube CD player).

Beyond Frontiers audio (BFA), Novi Sad (Hybrid electronics and DAC).

Big electronic system, Zemun (Analog Phase preamp corrector, HiFi shelf).

DIY speaker shop Krusevac (Cartridges, turntable accessories and cables).

DR Cables, Novi Sad (Speaker cables, RCA & XLR cables).

Kabel Master, Arandjelovac (Power strip and Power Cables).

Korato, Belgrade (Electronics, phono preamp).

Miraudio, Belgrade (Tube electronics, integrated amp, tube DAC).

Solaja audio, Belgrade (Tube electronics, phono preamp).

Solaja Harmony tube integrated amplifier

Supreme-Analog Trstenik (Gala speakers, Tangenta tonearm, modified Garrard 301 in Supreme-Analog plinth).

Trafomatic, Mladenovac (Tube electronics).

Sci-Tech

Best Technology For Professional Home Inspections

April 8, 2021 The Silo Leave a comment

A good residence isn’t dependent on mere infrastructure. There are lots of things to take into consideration. Even the neighborhood is an essential component in deeming an area suitable for life. Therefore, one should think carefully before choosing a house in a particular region.

Regardless of the other factors, every house always requires a thorough check before somebody decides to move in. This check includes all key aspects, including the rooms, yard, and drainage systems. For sewerage checking and repairs, ReliableDP may be the best option. Although working in limited areas, their extraordinary team provides satisfactory services without having to leave your house.

House inspection is a necessary process. It is a standard procedure worldwide to check the house for all faults beforehand. But during this unfortunate situation of the global pandemic, people cannot inspect new residences for themselves. But technology and the internet have been helpful in this regard as well. Here is the best-specialized software at your expense for those looking to check a house without risking their health.

1. HomeGauge

This website provides one of the fastest and best inspection services in the country. Thousands of professional inspectors are available on the site who can check properties on demand. The software works with both home and commercial properties, and there are dedicated employees for both types of housing. HomeGauge has reviews from thousands of happy customers who recommend the software to other people because of its quality of service.

A user can find an inspector on the site who will check the land on their demand. Whatever aspects the user wants to review, the inspector will look over them. They will then report back to them using a printed report or sending it online. The information can be in the form of video, document, customizable template, and other intuitive options. It is available for many devices, and users can access it for free or pay for the complete package.

2. Spectora

As powerful as its name, Spectora is a marvelous software that allows property inspection. Working on the same principles as the other software in the market, Spectora stands out because of its easy interface and quick navigation. Users save time and have the opportunity to explore the website and software in depth.

Spectora is a software best suitable for small-scale to medium-sized businesses. For those that require a simple but professional inspection report, this software is a great choice. While it provides numerous benefits to people in dire need of an inspector for their property, it is also available on other mobile platforms. Spectra offers a free trial until five professional inspections. Their subscription package starts from $99 per month, which only includes the software. The bundle package contains more features but is more expensive than the primary option.

3. EZ Home Inspection Software

This software is excellent to use. It provides lots of different features for a single purpose. It allows users to write detailed reports with minimal effort. While they may be easy to write, users can highlight their areas of interest with different colors. They can also create different sections, so every inspector knows which aspect to examine.

Also, the software provides photo attachments, commenting, and template services. Users can also create a precise summary from their report to send to their client. The software is available in different packages, and a trial of 30 is also a viable option for those in urgent need. For people looking to send a quick analysis of their observations, this software might do the job perfectly.

4. Property Inspect

Another great option for inspection and reporting is Property Inspect that is more advanced than other software. It provides as many features as the different software on this list, but it is ranked relatively low due to its sophisticated layout and employment range. Nevertheless, it is an excellent piece of technology that users can employ for checking on their necessary properties.

Property Inspect is the software of choice for real estate agents, property managers, universities, commercial inspectors, and many other people. It provides loads of features, ranging from offline report management to custom templates. It also offers standard audio communication, an ordinary dictionary, and many other engaging intuitive. The company offers different plans for usage, with a free trial option for 14 days.

5. Horizon Software

This software comes from a person who has been in the field for almost 44 years. Carson Dunlop created this website where people could find inspecting officers for commercial buildings and warehouses. These professionals can perform their duty very well, and the methods to report back to their clients are pretty remarkable. It also provides scheduling so that one can send their officer at the time of their requirement.

Horizon Software is also available on all major mobile devices. One of Carson Dunlop’s project’s best features is that it also provides support and training in inspection to those looking for skill. Web hosting and archiving are also available on their website. Users can try it for free for a limited time. After that time, they’ll have to pay at least $67 a month to keep it.

Choosing one of these technological inspecting prospects can save a lot of your time. They work effectively and have excellent reviews from satisfied customers online. While some are available for free, others might offer a premium package for more services, but that’s up to you depending upon your needs.

Sci-Tech

High Tech Houseplants That grow air

January 15, 2021 The Silo Leave a comment

Clairy is an astounding handcrafted object that monitors your indoor air quality and when VOCs (Volatile Organic Compounds such as cigarettes, solvents, pesticides, copy machine chemicals etc.) levels are bad, eliminates pollution in your home. It makes you and your beloved ones breathe better and live better. It is much more than a pretty houseplant.

How is that possible?

Following an 80s NASA Clean Air Program research project, Clairy uses the power of specific species of plants to trap the air pollutants into their roots. That’s why it doesn’t need filters: the plant is the filter!

Clairy has also tech sensors that communicate with an app, so you can check directly the levels of humidity, temperature, and VOCs of your home with your smartphone.

What makes Clairy so beautiful?

It’s 100% Made in Italy by the artisans of Nove, near Vicenza, where the techniques of working with ceramics have been transmitted from father to son for centuries.

You can choose from four different colors: Corallo, Alabastro, Acquamarina and Blu Mare.

You should also consider our Premium Edition, Nero and Rame, made with the special technique called “Terzo Fuoco”. A masterpiece of Italian design you must have in your home. Holiday time is approaching, and we all want to give a gift that can be beautiful and useful at the same time. Clairy is the answer. For the Silo, Andrea Passador.

Sci-Tech

Elon Musk Backed Neuralink Company Demos Hard Wired Human Brain Machine

September 2, 2020 The Silo Leave a comment

Elon Musk is one step closer to connecting a computer to your brain.

Neuralink is building a brain-machine interface as well as a little robot that installs the necessary wiring directly into your skull. Neuralink, the mysterious neuroscience company backed by Elon Musk, revealed more details about its plans to connect computers to human brains recently.

Musk explained that his off-the-radar neuroscience company Neuralink continues to push the boundaries of science with its latest model: the aim being not only for a smaller interface but for a vastly more powerful interlink.

*The size of the flexible threads, attached to a fingertip for scale.*
Image: Neuralink

In 2019, using tiny wired pathways or neural links implanted directly into the head , a discrete behind the ear ‘controller’ received the wired pathway signals wirelessly. Computers running proprietary software are able to track the brain activity in real time. The latest version, just announced is a coin size device that sits on top of your head and is wired to go directly into your brain.

The chip that amplifies signals and sends them off to a computer. — The chip in the last years’behind the ear’ receiver.

Elon Musk unveils new Neuralink brain implant design and robot that inserts it. — Unlike last years behind the ear model, the new model on the right is almost impossible to notice.

Cyber Frankensteins

This technology in a cruder form, has been used already to enable amputee control over prosthetic robotic limbs but the neural link was not hard wired or physically connected to the body.

Musk stressed the wide variety of spinal and neurological conditions — including seizures, paralysis, brain damage, and depression — that Neuralink technology could help treat. “These can all be solved with an implantable neural link,” said Musk. “The neurons are like wiring, and you kind of need an electronic thing to solve an electronic problem.”

However, this new hard wired development changes things- not only in terms of faster and more accurate tracking of brain impulses but in the implications of what may be possible using hard wire. How about human pilots directly wired into the flight and combat systems of an advanced flying craft? Or a neural link human network where brain impulses can be transmitted and received between linked in people? Or a monkey that can control an advanced computer? Oh wait, that last one actually happened….

For the Silo, Jarrod Barker.

Reviews

PS Audio Shipping New Stellar™ M1200 Monoblock Power Amplifier

May 13, 2020 The Silo 1 Comment

Boulder, Colorado, May, 2020 – PS Audio recently announced it is shipping its new Stellar M1200 Power Amplifier. Designed to deliver extraordinarily clear, detailed and musically accurate performance, the monoblock M1200 features an all-new hybrid design that combines a tube input stage with a customized ICE Edge output stage and delivers 1200 watts (into 4 ohms, 800 watts into 8 ohms), to effortlessly reproduce the most dynamic musical passages as well as the subtlest musical details.

The M1200 was designed by Darren Myers, the engineer who created the acclaimed Stellar Phono stage and other PS Audio products. The M1200 employs a 12AU7 vacuum tube at its input, chosen for its optimum gain and voltage characteristics in the circuit, and for its ability to preserve the most delicate nuances of the amp’s input signals. The 12AU7 is the identical tube used in PS Audio’s flagship BHK Signature amplifiers, chosen after extensive listening and performance tests.

The ICE Edge output stage is a new type of high-current Class D design, offering extremely low total harmonic and intermodulation distortion with high headroom and linear performance across the frequency range. As Darren Myers explained, “other output modules can exhibit non-linear phase and impedance issues at the frequency extremes. The ICE Edge design eliminates these problems thanks to patented circuitry and feedback techniques.” Myers continued, “Although it can deliver massive amounts of clean power into even the most demanding loudspeaker loads, the M1200 sounds equally good at lower volumes.”

Like every PS Audio product, meticulous attention has been paid to parts quality and construction. The M1200 has a sleek, elegant appearance that matches other Stellar Series components and is available in silver or black.

The PS Audio Stellar M1200 Power Amplifier will be available in June 2020 at a US manufacturer’s suggested retail price of $5,998 per pair. Pre-orders are currently being taken.

M1200 Features at a Glance: Zero-loss vacuum tube input stage and custom ICE Edge output stage. Fully balanced circuitry, RCA single-ended and XLR balanced inputs. 1200 watts RMS into 8 ohms, 600 watts into 4 ohms, stable to 2 ohms. Greater than >1100 damping factor for exceptional loudspeaker control. High-efficiency operation. Dual, solid copper, plated output binding posts facilitate bi-wiring, 12-volt input trigger, 27 lb. each; 17″ wide by 3.75″ high by 12″ deep (13″ with connectors)

About PS Audio
Founded in 1973, PS Audio has earned a worldwide reputation for excellence in manufacturing innovative, high-value, leading-edge audio products. Located in Boulder, Colorado at the foothills of the Rocky Mountains, PS Audio’s staff of talented designers, engineers, production and support people build each product to deliver extraordinary performance and musical satisfaction. The company’s wide range of award-winning products include the all-in-one Sprout100 integrated amplifier, audio components, power regenerators and power conditioners.

www.psaudio.com
PS Audio Image Library available for download here
Paul’s Daily Posts
PS Audio Community
Copper Magazine

Culture

“Doomsday Clock” Update Scheduled For Today In Washington, D.C.

January 23, 2020 The Silo Leave a comment

Announcement Comes As Nuclear, Climate, and Tech Issues Dominate An Unsettled World Stage; Experienced World Leaders to Join Bulletin Experts on Climate and Nuclear Warfare.

WASHINGTON, D.C. – NEWS ADVISORY – The Bulletin of the Atomic Scientists will host a live international news conference at 10 a.m. EST/1500 GMT on Thursday, January 23^rd, 2020 to announce whether the minute hand of the iconic “Doomsday Clock” will be adjusted. The decision is made by the Bulletin of the Atomic Scientists’ Science and Security Board in consultation with the Bulletin’s Board of Sponsors, which includes 13 Nobel Laureates.

The factors contributing to the decision about the Doomsday Clock time will be outlined today.

The Doomsday Clock did not move in 2019. However, the Doomsday Clock’s minute hand was set forward in January 2018 by 30 seconds, to two minutes before midnight, the closest it has been to apocalypse since 1953 in the early years of the Cold War. Previously, the Clock was moved from three minutes to midnight to two and a half minutes to midnight in January 2017. Click the image below to watch the live stream of the news announcement.

News event speakers for the Doomsday Clock announcement on January 23^rd, 2020 will include:

Former UN Secretary-General Ban Ki-moon, deputy chair, The Elders; and former South Korean Foreign Minister;
Former California Governor Jerry Brown, executive chair, Bulletin of the Atomic Scientists;
Former President of Ireland Mary Robinson, chair, The Elders; and former UN High Commissioner for Human Rights;
Rachel Bronson, president and CEO, Bulletin of the Atomic Scientists;
Robert Rosner, William E. Wrather Distinguished Service professor, Departments of Astronomy & Astrophysics and Physics at the University of Chicago; and chair, Science and Security Board, Bulletin of the Atomic Scientists;
Sharon Squassoni, research professor, Institute for International Science and Technology Policy, Elliott School of International Affairs, The George Washington University; and member, Science and Security Board, Bulletin of the Atomic Scientists;
Robert Latiff, member, Science and Security Board, Bulletin of the Atomic Scientists; fellow, University of Notre Dame Institute for Advanced Study; and member, Intelligence Community Studies Board, and the Committee on International Security and Arms Control of the National Academies of Sciences, Engineering, and Medicine; and
Sivan Kartha, member, Science and Security Board, Bulletin of the Atomic Scientists; and senior scientist, Stockholm Environmental Institute.

For the Silo, Alex Frank & Max Carlin.

Sci-Tech

How Technology Will Shape Teaching In The Future

January 13, 2020 The Silo Leave a comment

In the past decade and a half cellphones have evolved from contraptions you make calls from to devices that do so much more. Now they can help you organize your social life, perform your banking and act as a food diary. There’s an app to be found that is based on your entire existence!

With tablets being commonly used in schools, and the fact that ICT is a relatively new subject, technology is changing the way students are being taught.

In this piece, we’ll provide a comprehensive guide of how technology will shape the future of education and what students will be studying and using in years to come.

From making use of 3D printers, to using virtual reality as part of an immersive learning experience, the possibilities are endless!

So what are you waiting for? Take that first step to get ahead in the future by having a sneak peek in this infographic from our friends at educationcity.com.

Sci-Tech

How F1 Cars Move Around The World For Races

November 28, 2019 The Silo Leave a comment

This year’s 2019 Formula 1 Etihad Airways Abu Dhabi GP is almost here! Have you ever wondered how the cars make it to the race? It’s a logistical miracle. Custom containers. Hydraulic platforms. Modified cargo jet airliners and much, much more. If you’re a fan of F1 races you may have wondered how your favorite team manages to travel all around the globe in order to make it to the circuit safely on time. Some teams save money by using cargo ships and traveling via sea. Sometimes, they are required to complete this entire process from start to finish in only 48 hours!

Take a look at this nifty infographic from our friends at storagecentres.co.uk to learn more and have another level of appreciation for this incredible sport.

Art

Armstrong’s Heartbeat As Merged Artwork Beamed To Moon

July 20, 2019 The Silo 2 Comments

“For me It was an incredible feeling to use this 120 ton radio dish, capable of peering into the far reaches of the universe, to create an artwork focusing on one of the greatest achievements in human history” Richard Clar image: space.com

Los Angeles, CA, – Richard Clar using an earth-moon-earth (EME), or moon bounce as it is also called, radioed two very special signals off the surface of the moon where their return was received at Dwingeloo Radio Observatory in the Netherlands.

Clar’s extraordinary two-part project, Giant Step and Lune sur la Lune, paid tribute respectively to Apollo Astronaut pioneer Neil Armstrong’s first step on the moon on July 20, 1969 and to the far side of the moon itself, something witnessed only by a rare group of individuals, the Apollo Astronauts. The two radio transmissions to the moon and back emanated from a radio dish in Italy.

Giant Step is a personal response to an event Clar personally witnessed back in 1969, and he wanted to use his creativity to pay tribute to those who took part in the Apollo program, and especially Neil Armstrong for what he did on that momentous day.

He wanted this work to say something about the moon itself, using the moon.

His interest was piqued after hearing about an earth-moon-earth bounce (EME) from Italian artist and colleague, Daniela de Paulis, who together with radio specialist Jan van Muijlwijk developed the process of using EME to send images to the moon and back in 2009. As he researched the Apollo Archives, he came across an Electrocardiogram (EKG) of Neil Armstrong as he took the first step on the moon on July 20, 1969 – and Richard found his inspiration!

While data scientist Dr. Ryan Compton created the sonification tone from Armstrong’s actual EKG graph, prominent Los Angeles-based double-bass jazz performer and composer Roberto Miranda used the tone to create compelling sounds that have been called “edgy and hauntingly beautiful.”

In addition, an image of the first footprint on the moon was transmitted and bounced back to Dwingeloo. [Listen to Neil Armstrong’s heartbeat beginning at the 2:10 mark here Ed.]

“I wanted the art to say something about the first humans to set foot on the moon. Think how many living beings have observed the moon for eons…and now we have made a number of trips to the moon and back. I want people to have new experiences through my artwork,” says Clar.

Lune sur la Lune, an image of the far side of the moon, was transmitted in a poetic gesture onto the earth facing side of the moon. Since only the Apollo astronauts have seen the far side of the moon, using the radio-reflective surface of the moon to produce a site-specific artwork makes the moon a unique part of the process rather than just a subject matter ─ and also gives people on earth an opportunity to witness this phenomenal event and experience the moon in a new and different way. Shortly after the sound and image from Giant Step and Lune sur la Lune were received and processed at Dwingeloo, and will soon be accessible to the world at www.rockthemoon.com.

There was considerable excitement at the Dwingeloo Radio Dish on September 26th by those who witnessed the sound signal and image signals being received from the surface of the moon after the moon bounce. All in all, the art mission was a great success.

“For me It was an incredible feeling to use this 120 ton radio dish, capable of peering into the far reaches of the universe, to create an artwork focusing on one of the greatest achievements in human history,” stated Clar.

Richard Clar’s timeless work has been exhibited in museums, galleries and universities throughout the United States and Europe. His visionary ‘art in space’ began in 1982 with a NASA-approved concept for an art-payload for the U.S. Space Shuttle. Philosophical in nature, many of Clar’s themes originate in space environment issues, such as orbital debris, war and peace, the Search for Extraterrestrial Intelligence (SETI), and water management on earth.

Clar studied at the Chouinard Art Institute (now Cal-Arts). In 2001 and 2002, he coordinated the Leonardo/OLATS/IAA Space Art Workshops in Paris. Clar is the Director of Art Technologies; a Member of the International Academy of Astronautics (IAA); a Member of the IAA SETI Permanent Study Group; a Member of Women in Aerospace, and a Member of the Leonardo Space Art Working Group. He was the Secretary of the former Art and Literature Subcommittee of the International Academy of Astronautics, and a past Member of the Executive Board, Graphic Arts Council, the Los Angeles County Museum of Art.

An early example of Richard Clar's Space Art — An early example of Richard Clar’s Space Art

Clar founded Art Technologies in 1987 as a liaison between the worlds of art and technology. By collaborating with such partners as the U.S. Naval Research Laboratory, Boeing Aerospace Corporation, and contemporary composers, Clar generates high-visibility art works that transform state-of-the-art technology and highly-engineered materials into evocative contemporary art. His work is found in many corporate collections, including JBL Sound, Home Savings of America, and the MGM Grand Hotel in Las Vegas.

After spending the last fourteen years in Paris, Richard Clar now resides in Northern California. For more information on his extraordinary artwork, please visit:

http://arttechnologies.com
http://rockthemoon.com
https://www.facebook.com/RichardClar.ArtTechnologies

Culture

How Societies Become Consumer Cultures Through Housing

April 14, 2019 The Silo 1 Comment

Alfred Marshall’s (Principles of Economics, 1891) view of housing still goes right to the heart of what makes housing and built environment an important anthropological topic. No artifact is so clearly multi-functional, simultaneously a utilitarian object of absolute necessity, and an item of symbolic material culture, a text of almost unending complexity.

In every house the economic, social and symbolic dimensions of behavior come together. This may be why the analysis of housing has had such a wide appeal in disciplines as diverse as social psychology, folklore, economics and engineering. Anthropologists themselves have shown a new willingness to consider the house as a key artifact in understanding the articulation of economic and social change during economic development.

From the perspective of our own contemporary society, surrounded by houses of all shapes and sizes, where wealth and luxury are synonymous with housing, this seems obvious and commonplace. The 1980’s television show “Lifestyles of the Rich and Famous” and journals like “Architectural Review” are odes to the home as a shrine and symbol of wealth. But just as clearly, there are societies where all the houses look alike, even though all the people are not alike. Perhaps then, the assumption that there is something natural and obvious about spending on the house and home market as a marker of prestige is ethnocentric. Why the house instead of something else?

A number of anthropological approaches attempt to place the house in a theoretical context which answer this question by relating housing to social, economic, and psychological variation and change. For example, a utilitarian approach that views the house partially as a workspace links changes in the elaboration of houses to changes in the kinds of work done in the household (Braudel 1973:201). Or if the house is seen as a reflection of how all household activities are organized and divided, then the shape of the house will change as activities are modified, differentiated, or recombined (Kent 1983, 1984).

An even more utilitarian perspective relates the form of the house to climate, technology and the kinds of building materials that are available (Duly 1979). For the Silo, Richard R. Wilk.

Read on..click here and read the full PDF document on your device.

Supplemental- Complete Text Principles of Economics (London: Macmillan and Co. 8th ed. 1920).
Author: Alfred Marshall
About This Title: This is the 8th edition of what is regarded to be the first “modern” economics textbook, leading in various editions from the 19th into the 20th century. The final 8th edition was Marshall’s most-used and most-cited.

Reviews

Supreme Analog Vinyl Record Weights Trending

February 11, 2019 The Silo Leave a comment

“If there is no sound philosophy in making the audio gear, then all product you make is plagiarism.” Zoran Mihajlovic
Having grown up around record players of dubious quality, I remember very clearly my first ‘real’ turntable. An audiophile friend of the family helped my father put together an entry level system for my 15th birthday. The system included 3 way Acoustic Research speakers, Sansui integrated amplifier, Sansui 3 head cassette deck and my first decent turntable- a gently used Sansui direct drive with a shiny S-arm and what looked like a strange silver hockey puck.

At 15 I was into my second year of drumming and with this turntable was now able to play along to LP records without having to worry about the inevitable skipping that the cheap family record player performed almost every time I hit the bass drum hard. I later learned that the puck was actually a custom made record clamp that the previous owner had fashioned to squeeze every last bit of performance out of the record player.

There is a surprising amount of science behind the advantages of using record clamps to ‘push’ the vinyl down onto the slipmat and platter and people that use them swear by them. In general terms, the added mass from the fitted clamp flattens warps in the record and a beneficial flywheel effect takes place once the record is spinning at speed.

Today, turntable designs have advanced and exotic materials and technologies are incorporated into high end models. This has translated into a need for ultra high quality clamps designed to properly secure records to all kinds of esoteric spindles and platters.

Enter Zoran Mihajlovic- a man devoted to producing the highest quality record clamps such as the Model 1 via his Serbian company Supreme Analog. At 3000 euros (at time of this article, 1 euro = 1.5 Canadian dollars) , this is a record clamp (Supreme-Analog calls it a record weight) that is produced on order only and commands attention.

70mm wide, 50mm high, 460g weight
Swiss stainless steel and Serbian sinked wood

If you are on a more modest budget, they also offer the BL-006 for 250 euros. Also made from Swiss stainless steel, the more basic model weighs in at 950g and ships world wide for free in a solid wood box.

It’s easy to tell that Supreme-Analog have a real passion for audio and they make a number of interesting products including jewel like tonearms and gorgeous horn speakers. Check them all out. For the Silo, Jarrod Barker.

Sci-Tech

Edifier Setting Bar High For Affordable Bookshelf Speaker Quality

July 12, 2018 The Silo Leave a comment

Here in Canada, you may not have heard of Edifier but take note- their state-of-the art manufacturing facilities in China produce 8 million units every year for home, consumer electronics and PC multimedia applications. Edifier specializes in premium sound systems that showcase technological innovation and design elegance while keeping prices amazingly low.

Normally if you are spending just $100 on a set of speakers you expect to be left desiring better quality. Let’s take a closer look at our review pair that arrived safely in a well packaged box. The Edifier R1280T are an affordable, entry-level set of bookshelf speakers that deliver clear and balanced sound at low or high volumes. For only $124.99CDN including free shipping to Canada these speakers set a new standard for affordable quality.

The speakers have a 102mm (4-inch) bass driver and a calibrated, flared bass reflex port augmented by a 13mm silk dome tweeter for a total output of 42W RMS (21W each speaker). An optional front cover can be removed to expose the speaker components allowing for a sleek look or a more exposed techie aesthetic. Use them with a television, computer, or other device, they sound great on any surface because of the design team’s passion for sound and for quality.

Edifier’s uncompromised design elegance is recognized internationally by prestigious design awards. Some of their designs are winners of the Red Dot Design Award, the iF Product Design Award and the CES Design & Engineering Showcase Honours.

Anechoic Chamber Edifier Speakers — “Inspirational design derived from architecture, furniture, automobiles, home electronics — even nature itself — provide for ideas that transform themselves into unique sensory and emotional products with functional simplicity, coupled with technological excellence. It’s a journey to provide an exceptional audio and visual experience with design elegance, innovation, features and measured risks, for whatever the application, to form a lasting end-user impression and experience.”
— Anthony Wilkinson, Managing Director, Edifier International Limited

R1280T powered bookshelf speakers lets you connect to multiple audio devices using the dual RCA inputs. By looking at the back panel you can easily tell one of these is a passive speaker and one is an active speaker. The active speaker has two inputs located on the back. These inputs are perfect for RCA to RCA or RCA to AUX connections. Connect them to a PC, laptop, tablet, phone or record player. The speakers are connected to each other via regular speaker wire (included along with a generous variety of cables to ensure you enjoy your music from most devices right out of the box- if you require digital connections or bluetooth Edifier make a larger model).

Some overseas manufacturers of electronics have been questioned about their environmental impacts and strategies but refreshingly, Edifier are committed to best operating practices.

Use suppliers of raw materials who practice environmentally friendly manufacturing.
Use LED and T5 lighting in all office floors and manufacturing facility.
Install solar panels for water heating.
Use Biological Liquid Processing to reduce and filter fume emissions.
Use Membrane Bioreactors to recycle waste water

For environmentally conscious, budget minded individuals looking for a solid entry level speaker with the convenience of remote control and easy hook-up you can’t go wrong choosing the R1280T. Highly recommended.

We spent several days and evenings having fun with these speakers in a small bedroom Laserdisc and projector bookshelf setup. The sound quality was quite nice, dialogue was easy to understand and stereo soundtracks came to life, even with a noisy air conditioner running and the fan noise from the projector.

The speakers will most likely benefit from a break in period as new drivers tend to have a slight compression effect that is alleviated as the speaker suspension is stretched from playing source material. These speakers fit nicely onto the shelf and were easy to position and operate, we were pleasantly surprised by the handy mini remote control that arrived with batteries included. For darker watching conditions we left the front grilles in place but would be happy to remove them and show off the nicely designed faux woodgrain cabinet sides in brighter conditions. Highly recommended…

For the Silo, Jarrod Barker.

Reviews

Toronto Inventor Tackles Awkward Toilet Paper Holders

September 5, 2017 The Silo 3 Comments

Toilet paper … it’s one of life’s necessities. Then why is the roll so difficult to replace? The problem lies in the awkward spring tube holder that always leaves you fumbling. No one wants to deal with it. We all know of that one person that always fails to change out the toilet paper roll. They’ll leave the empty roll on the holder and put a brand new one on top of the toilet or counter. The ZeNa attachment will solve that bad habit. Thanks to Alex Li, a thinker and inventor out of Toronto, Canada, this bathroom conundrum has finally been solved.

You can now change a roll out in a matter of seconds. It’s faster, easier and cleaner than the traditional spring tube method.

The ZeNa Attachment is an incredibly smart solution that fully modernizes your toilet paper holder. Its peel and stick design securely attaches (in seconds) to your existing TP dispenser, so there’s nothing more to install or buy. ZeNa Attachment’s patent pending swing design lets you swap out toilet paper rolls with one hand and it keeps it all in place with zero fuss.

Design

The patent pending design is an easy attachment to add to your existing toilet paper holder. No need to hire a contractor. The heavy duty double-sided foam tape on the underside of the base is super strong. Simply stick this on to your clean existing holder and you’re good to go. Both sides are the same so there’s no getting this wrong.

The arms always fall back into place from a tension mechanism that forces the arms downward. So it doesn’t matter if your ZeNa Attachment is not level as long as you have installed it properly, it will work.

The ZeNa Attachment is super durable, comes in several colors and is the perfect bathroom assistant for the disabled, kids and seniors too. Learn more and support this initiative by visiting the ZeNa Kickstarter page. For the Silo, Jarrod Barker.

Reviews

Luxurious Aquila Reaches Power Catamaran Milestone

August 10, 2017 The Silo 1 Comment

CLEARWATER, Fla. – Aquila is pleased to announce that they have built their 100th catamaran boat, an Aquila 44.

The Aquila 44 boasts Aquila’s signature fresh evolution of classic boating traditions where efficiency in design and performance compliment her luxurious living and was named “Best New Multihull 40′-49′” in the 2014 AIM Media Editor’s Choice Awards.

“This is an exciting and momentous occasion for us. From the very beginning, we have felt the Aquila Power Catamarans were the best in the world, and we have been excited to be a part of the team designing and building them. We look forward to surpassing this milestone and continuing to celebrate many more,” stated Frank Xiong, Sino Eagle Group CEO.

Construction of Aquila Power Catamarans began in 2012 when Sino Eagle Group began building the Aquila 38 specifically for MarineMax, the world’s largest power boat dealer, for its new charter business in the British Virgin Islands (BVI).

In 2012, experts from multiple development, design, and manufacturing firms, namely, Sino Eagle Group, J&J Design Group, Seaway, and MarineMax, all collaborated to expand the Aquila range by developing a new, purebred power catamaran.

This international team consisted of MarineMax’s Lex Raas, a highly-experienced boat developer and charter industry veteran, and J&J Design group and their development arm, Seaway, who have worked on designs for Azimut, Bavaria, Beneteau, Dufour, Jeanneau and Monte Carlo. This highly regarded, award-winning group began the process of designing the first true Aquila Power Catamaran, the Aquila 48.

“Bringing this group of companies together made for a very knowledgeable and powerful team. We’ve been able to combine our experience and expertise to design and build boats that are innovative and truly setting new standards for the industry,” stated Lex Raas of MarineMax.

To position itself to become a prominent boat builder, Sino Eagle Group, recognized globally in high-tech composite manufacturing, built a new factory which provided the Aquila brand with full in-house manufacturing capabilities paired with in-depth knowledge and experience in advanced yacht building practices.

With the combined knowledge and advanced experience of the most talented group in the yachting industry, Aquila is establishing a new standard of power catamaran innovation and becoming the game changer in the marketplace.

Aquila represents the newest and most exciting evolution on the market today, offering practicality and comfort with trend setting innovation, quality, and design. Both inside and out, Aquila Catamarans are designed to provide the perfect cruising vessel whether crossing oceans or traveling the Great Loop, living aboard, or exploring worldwide destinations, or simply entertaining friends and family at the dock. The expanding Aquila range currently consists of the Aquila 36, Aquila 44, Aquila 48, and will soon be including the Aquila 60 (2019 debut). MarineMax is the exclusive dealer for the Aquila brand boats throughout the world other than mainland China.

“Congratulations to the Sino Eagle Group, J&J Design, and MarineMax teams for their hard work on designing and building industry leading catamarans. Passionate teams pulling together has created winning products for our customers,” exclaimed Bill McGill, MarineMax CEO.

Aquila is excited to have reached this milestone in their continued growth to new markets with new model offerings.

ABOUT AQUILA

Recognized globally for its high-quality, advanced composite manufacturing capabilities, Sino Eagle Yachts builds Aquila Power Catamarans in a state-of-the-art facility to exacting standards. With one of the most talented teams in the industry providing the combined knowledge and extensive experience, Aquila has established a game changing new standard of power catamaran innovation. Leading the way in the market segment, Aquila continues to pave the way with strong international sales of the award-winning Aquila brand. Uncompromising design coupled with unmatched industry experience, engineering, and manufacturing by world class builders, make up the Aquila line of true pure-bred power catamarans. For more information visit aquilaboats.com. For the Silo, Sara Yasi & MarineMax.

Travel

Travel Friendly Solutions That Will Enhance Your Experience

August 4, 2017 The Silo Leave a comment

As one who is exposed to new product innovations as a regular course of business, I’ve seen my fair share cool gear and smart solutions that’ll make the rigors of travel, well, that much less rigorous. From leading-edge technology to killer fashion and keepsakes to helpful health and wellness resources to things that just make jaunting more fun, here’s an awesome assortment of things I’m absolutely loving right now.

V-MODA Remix – Premium Bluetooth Speaker (www.V-Moda.com) – $300.00USD
Nothing beats a picnic or beach outing, or a killer backyard soiree, like your favorite tunes playing in the background. Now that’s super easy with the Remix Premium Bluetooth Speaker from V-MODA—the company’s first Bluetooth portable speaker boasting a built-in amplifier and hi-fi sound quality. As the world’s first 3D-printed custom speaker, all six sides of REMIX can be personalized (patent-pending). Using V-MODA’s renowned jewelry-grade 3D-printing expertise, owners can add new sides, change the front grill or even replace the main “C-shell” housing for the ultimate in bespoke appearance. Built on the foundation of V-MODA’s multi-award-winning audio technology, Remix projects precise and vibrant sound at all listening levels. Available in two finishes–minimal CNC aluminum and luxurious vegan leather–this premium speaker exemplifies the work of V-MODA’s Milano-based design studio. It’s classically styled, beautifully proportioned and completely customizable on all six sides to reflect the personality of its owner. Led by Chief Visionary Officer and professional musician Val Kolton, V-MODA blends analog renaissance age inspiration, Italian design and precise Japanese engineering. V-MODA products have reportedly won 40-plus editors’ choice awards and have become essential gear for the world’s top professional DJs.

Cotton Junkies (www.CottonJunkies.com) – Starting at $31USD

Whether touring with family and friends or knocking around town, a great way to keep cool and comfortable, while still being fashionable, is with Cotton Junkies. This company’s super comfy tees are great year-round! They offer a nice range of tees and tank tops for both him and her in the softest of cotton–and the standout designs are super cool. Centered around an ethos of natural style, sex appeal and comfort, this brand new label combines cotton, the most comfortable of materials, with modern designs in eye-catching colors from charcoal greys and electric blues, to volcano reds and sage greens. From V-necks to crew necks, their secret is in the way the cotton is treated. All of their merchandise is handpicked, and uses a blend of organic cottons with other natural materials that are U.S. made and pre-washed for a true-to-you fit and style. This means they don’t shrink in the wash! What’s more the brand has a unisex feel, so a lot of the tees for him can be worn by her!

Grayton Automatic Watches ‘Radiance’ Collection (www.Grayton-Watches.com) – Starting at $200USD
For any travel itinerary, keeping time is of the essence. And, the ‘Radiance’ Collection from Grayton Automatic Watches is a way to do this in fab form. They feature a classy design and advanced quality reflecting the company’s exceptional experience of crafting automatic watches—and offering them at a reasonable price. Like the prayer flags that sway eternally in the breeze, the colors of the Radiance collection watch dials are said to be inspired by the unique color palette of Shangri-La: green alpine pastures, white-silver mountain snows or brown wooden Tibetan chalets in the old city itself. The elegance of the Radiance collection makes it the perfect combination between traditional and modern. Grayton choose top-quality materials for watch cases, straps and bracelets, and integrates a Japanese movement by Seiko—a respected standard in the watch industry and a token of quality. One of its finest features is its transparent backside design that allows you to see the detailed mechanical movements operating within the watch. Its super luminous colored hands will also tell you the time no matter how dark it is. Whether for style, quality or utility, This and other Grayton Automatic Watch designs can be handed down from one generation to another as valued family treasures.

Grafo Maps (www.GrafoMap.com) – $49USD – $168USD
Here’s something great-looking and fashionable for your walls! Remind yourself of the place you grew up, went to college, your honeymoon location, or that unforgettable vacation spot with a beautifully designed custom map poster from Grafo Maps. These posters are an artful decor piece designed by you. The company’s easy-to-use online poster editing tool lets you design anyplace you love—you can even search by address. Once you have found the perfect spot you want to map, simply choose a color scheme that will add even more personality to your piece. Within days you will receive your unique one of a kind poster printed on acid-free 180g matte paper made to not only to look great, but also last a lifetime. You can order it framed or unframed. Place it in a special location as a reminder of that place you love or a special event. It’s sure to spark conversations with family and friends.

tech21’s Impact Clear Urban Edition Case (www.Tech21.com) – $44.95USD

It’s imperative to keep that iPhone safe while out and about. Clear protection meets urban design with the Impact Clear Urban Edition Case from tech21. Inspired by minimalistic streetwear, The Urban Edition offers a unique geometric pattern with sleek and clean lines, fit for the fashion-conscious smartphone user looking to coordinate their case with their outfit in a subtle manner. tech21 products feature a highly advanced impact protection material called FlexShock, which is an ultra-thin and lightweight material that absorbs and dissipates force and can withstand drops up to 6.6 feet. With enhanced UV yellowing resistance and a durable, scratch resistant finish, your phone, and your case, will look better for a longer period of time. It’s available in two different styles and two colors (Brushed Black or Clear White) for the iPhone 7 and 7 Plus. Combining urban design with clear materials and advanced drop protection, the Urban Edition can keep your phone as beautiful as the day you took it out of the box.

Kardia Mobile (www.AliveCor.com) – $99USD
Here’s a way to stay heart healthy all year through and no matter where you are (however near or far from your doctor): the Kardia Mobile personal EKG. Sadly, more people die from heart disease and stroke each year than any other disease- but did you know that 80% of strokes are preventable? Kardia Mobile is a consumer EKG monitoring device that allows you to quickly access, track and analyze your heart health. Taking a clinical-grade heart rhythm reading in just 30 seconds, results are delivered right to your smartphone! Now you can know anytime, anywhere if your heart rhythm is normal, or if atrial fibrillation is detected—helpful data that can reduce your risk of stroke. Smaller than a credit card, it provides a way for people to easily take their health into their own hands. Kardia Mobile gives you peace of mind right from your pocket.

International Hyperhidrosis Society ‘Fan Faves’ Products (www.SweatHelp.org) – Prices vary
Excessive sweating, or hyperhidrosis, is a serious medical condition that affects approximately 5% of the population. This means that nearly 367 million people worldwide—including throngs of travelers—struggle with extreme, uncontrollable sweating…be it on their hands, feet, face, underarms, torso, lower extremities, or any combination of these—which greatly impacts their quality of life. From stress and embarrassment to depression and isolation, hyperhidrosis takes its toll; but there’s help! Since 2003, The International Hyperhidrosis Society has been providing information, resources, expert perspective, and support to those struggling with this condition. It’s is the only global non-profit organization dedicated entirely to improving the lives of those affected by hyperhidrosis while also supporting healthcare providers and researchers to improve hyperhidrosis treatments and understanding. From the International Hyperhidrosis Society’s website, SweatHelp.org, you’ll find up-to-date information on treatment options, U.S. insurance codes, clinical trials, a physician finder, an award-winning, useful blog, and much more. IHhS also maintains a useful product guide called “Fan Faves” where you can receive special discounts and discover ingenious, cutting-edge products to help handle even the sweatiest situations.

Image: The International Hyperhidrosis Society

WeCool Kits for Kids (www.BuyBobbleBitz.com) – $7.99USD – $29.99USD
For some crafty portable fun for kids I love the Compound Kings Makin’ Station from WeCool! This activity set lets kids make their own slimy mixture in just two quick-and-easy steps – and get it perfect every time. There’s no mess or long list of ingredients that need precise measuring. All they have to do is add water to the special powder mix in the activity center and the stretchy compound is ready within minutes! It yields more than one pound. Compound Kings offers a range of slimy mixes from single packs to activity sets, including glittery, fluffy, and crunchy slimes in addition to make-your-own varieties. Also awesome is WeCool’s Bobble Bitz Creation Station, an activity set featuring an irresistibly squishy, squeezy and crunchy medium that doubles as a molding compound. It’s a textured product kids have called “oddly satisfying” – like playing with bubble wrap. The set includes molds, tools and accessories so kids can make their own unique designs that air-harden overnight for cool 3D creations they can wear, share and display.

For the Silo, By Merilee Kern, ‘The Luxe List’ Executive Editor.

As the Executive Editor and Producer of “The Luxe List,” Merilee Kern is an internationally-regarded consumer product trends expert and hospitality industry voice of authority–a travel, dining, leisure and lifestyle expert who spotlights noteworthy marketplace innovations, change makers, movers and shakers. She identifies and reports on exemplary travel destinations and experiences, extraordinary events and newsworthy products and services across all categories. Reach her online, on Twitter , on Facebook and on Instagram.

***Some or all of the accommodations(s), experience(s), item(s) and/or service(s) detailed above may have been provided or sponsored at no cost to accommodate this review, but all opinions expressed are entirely those of Merilee Kern and have not been influenced in any way.***

Sci-Tech

New Book Is Inventors Guide To Open Source Arduino Microcontroller

July 7, 2017 The Silo Leave a comment

San Francisco, CA —School’s out for summer, but learning doesn’t have to stop at the classroom door. For parents and educators looking to keep their students exploring, tinkering, and creating, No Starch Press offers the latest addition to its lineup of STEM books. This time focusing on the Arduino microcontroller.

The Arduino Inventor’s Guide (No Starch Press, $29.95USD, 336 pp., June 2017) is a project-packed introduction to building and coding with the Arduino microcontroller. With each hands-on project, total beginners learn useful electronics and coding skills while building an interactive gadget.

This is No Starch Press’s second installment in its introductory-level educational series for aspiring makers. The series is a collaboration with SparkFun Electronics, the popular electronics parts retailer dedicated to making the world of electronics more accessible to the average person. Authors Brian Huang and Derek Runberg of SparkFun’s Department of Education use their teaching experience to make learning about electronics an adventure.

“We wanted to share the magic that happens when you build something interactive with electronics,” says Huang. “The goal is to teach real, valuable hardware skills, one project at a time,” adds Runberg.

Readers learn how to make their hardware move, buzz, flash, and interact with the world as they build 10 projects, including:

A miniature traffic light
A light-sensitive, color-changing night-light
A temperature-sensing mini greenhouse
A motorized, programmable robot
A tiny, playable electric piano

“We’ve teamed up with SparkFun to make electronics and coding skills achievable for anyone,” says No Starch Press founder Bill Pollock. “This book will take total beginners from blinking their first LED to programming their first robot.”

Sample pages from The Arduino Inventor’s Guide:

For the Silo, Amanda Hariri.

About the Authors

Brian Huang is the Education Engineer for SparkFun Electronics. He combines his knowledge of teaching and engineering to create professional development materials.

Derek Runberg works in the Department of Education at SparkFun Electronics, where he runs workshops about technology in classrooms and at conferences. He is the author of The SparkFun Guide to Processing.

SparkFun Electronics is an online retail store that sells electronic parts for DIY projects. It offers classes for the public as well as resources, tutorials, and professional development for educators through its Department of Education.

The Arduino Inventor’s Guide
Publisher: No Starch Press
Authors: Brian Huang and Derek Runberg
Print ISBN: 978-1-59327-652-2
Price: $29.95USD
Publication Date: June 2017
Specs: 336 pp., 4C Available in fine bookstores everywhere, contact marketingdirector@thesilo.ca for locations near you and online ordering information.About No Starch Press
From deep in the heart of San Francisco’s start-up gulch, No Starch Press carefully crafts the finest in geek entertainment. The growing list of award-winning No Starch Press bestsellers covers topics like LEGO, hacking, STEM, programming, science, and math. Our titles have personality, our authors are passionate, and our books tackle topics that people care about.

Earth

Tiller Institute Scientists Confirm Subtle Energy Found In ‘Secret Anti-Aging Potion’

February 6, 2015 The Silo Leave a comment

Researchers have independently verified the presence of a type of energy long believed to be the source of healing practices familiar to many as Reiki and Energy Medicine. This important discovery is based on the work of Jim Kaszyk, noted developer of The Ageless Secret (Kasz Enterprises).

Scientists at the William A. Tiller Institute: “When Jim Kaszyk first asked us to determine if a sample of his product contained Subtle Energy, we were reluctant….we had been trying to prove the existence of Subtle Energy for 40 years, with only minor success and had almost given up. Attempts to measure Subtle Energy usually involved the human energy field either in the measurement or in its creation.

“Critics could say that it was all just the placebo effect or wishful thinking. The samples that Kaszyk submitted had so much Subtle Energy they allowed us to create new test procedures allowing for the first time, not just a way to prove Subtle Energy existed independent of the body, but also a way to measure it. This is huge for science because until his discovery Subtle Energy was considered a ‘theoretical energy.’” These tests concluded that Subtle Energy does, in fact, exist. Founded by William Tiller, PhD., professor emeritus of Materials Science and Engineering at Stanford University, the Tiller Institute is a recognized authority on alternative medicine practices.

Click me to learn more... — Click me to learn more…

Subtle Energy is the basis for Reiki, Energy Medicine, Acupuncture, and 4,000 year old Traditional Chinese Medicine.

“Before now, Reiki and Energy Medicine were considered pseudoscience because that type of energy could never be scientifically proven,” Kaszyk explains. “Now it is no longer pseudoscience. The implications for health and beauty are enormous.

“I created www.ReikiTruth.org as an information resource for scientists, the news media, and the general public to see and learn about my discovery of a new natural energy that is all around us, with the power to change our lives. Subtle Energy is linked to aging and this discovery is the source for my new theory of aging: The Subtle Energy Theory of Aging.” Holistic Healing News recently endorsed Mr. Kaszyk’s work here:
http://www.holistichealingnews.com/the-beauty-of-subtle-energy-is-contained-in-groundbreaking-aesthetic-potion-the-ageless-secret/

Jim Kaszyk is a recognized pioneer in the field of chemistry with experience in the U.S. government and major manufacturing companies. After graduating from the University of Massachusetts with a Bachelor of Science Degree in Chemistry, Mr. Kaszyk served as a medic lab tech during the Vietnam War. He went on to become a toxicologist and researcher for the prestigious Laboratory of Pathology in Texas.

His father’s illness inspired him to delve into holistic and alternative medical solutions; in 1985 Mr. Kaszyk began extensive research in vibrational medicine following the works of Dr. Richard Gerber, M.D., and renowned Yale researcher Dr. Harold Burr. Combining his vast knowledge of chemistry with his new discoveries in vibrational medicine, Mr. Kaszyk developed catalyst chemistry, an innovative method of creating natural products, and founded Kasz Enterprises in 1989.

After discovering a formula that vastly improves skin quality and elasticity, Mr. Kaszyk refined and introduced The Ageless Secret. It soon caught the eye of physicians and anti-aging experts, inspiring countless unsolicited endorsements and accolades. After moving to Palm Springs, CA, in 2006, Mr. Kaszyk and The Ageless Secret have since been prominently featured in The Desert Sun, Desert Magazine, 92260, and on the PBS special Discoveries in Alternative Medicine and Spotlight on the Desert. For more information, visit www.LightEnergySecret.com and http://agelesssecret.com

Supplemental: FAQ’s

Q: Subtle Energy is an ancient healing energy. Critics have said it was all pseudoscience. You claim to have bottled it. What proof do you have?

A: We have a lot. We have a 10 page scientific report that was the result of 2 years of rigorous experiments and was published in a peer reviewed journal. We have other independent labs who have verified the results in the report.

Q: Do your products heal?

A: The Subtle Energy in our products is part of a large spectrum of energies that mirror the entire electromagnetic spectrum of heat, light and magnetism. Some of these energies are beautifying and some are healing. The same is true for this mirror image spectrum of Subtle Energies. Our products contain beautifying energies.

Q: Can you give me an example of beautifying energies?

A: Red light is a good example. There are many companies selling red LED lights to reduce the appearance of wrinkles.

Q: How do you know your products contain beautifying energies?

A: By its effect on skin. We know the Subtle Energy is there by its effects on water. The concept of energy may be hard for some people to understand, but think of a magnet. We can’t see the energy but we know it is there by its effects. Skin has lots of water. The effect we see on skin is a combination of the Subtle Energy infused ingredients and the Subtle Energy in the bottle. When the product is applied to skin we see the effect on skin with the lifting, plumping and tightening as result of the Subtle Energy causing the water within to act like it did when were young. This led us to a new theory of aging.

Q: What do you mean a new theory of aging?

A: We have discovered that young children have more Subtle Energy than adults. We learned this by doing tests with the children. We had several under the age of 10, hold a glass of cold water with both hands for 30 seconds. Then we tested the water. It tasted softer and bigger than normal water and it felt smooth. Almost like a skin lotion. The result is temporary, but is shows the power of Subtle Energy in children. Some teens could do this and some could not. We found very few adults could do it and those that could looked very good for their age. So there is a decline in the amount of Subtle Energy with age. We also know the results are due to a decline in Subtle Energy because we can have adults spray their hands with our Subtle Energy infused product and then hold the glass of water and the extra Subtle Energy gives them the ability to make the water tastes soft and smooth like when they were they were young. This led us to create The Subtle Energy Theory of Aging.

Minecraft Crafting Guide: Potions- http://minecraft-craftingguide.com/potions.html

Sci-Tech

Dolby Laboratories Media Emulator In Minnetonka Master Suite

March 1, 2013 The Silo Leave a comment

MINNETONKA, Minn. — Minnetonka Audio Software Inc. (MASI), a leader in production software for motion picture, broadcast surround sound, and consumer electronics applications, recently announced that it is now providing worldwide distribution and resales of the Dolby(R) Media Emulator toolkit from California-based Dolby Laboratories Incorporated. This fortifies Minnetonka Audio’s already comprehensive offering of production problem solvers. Minnetonka Audio has added Dolby Media Emulator to its SurCode for Dolby E Master Suite 3 product bundle without raising the bundle price.

“Our strategic decision to distribute Dolby Media Emulator strengthens our current product mix and expands our reach into more post suites,” said Jayson Tomlin, vice president of business operations at Minnetonka Audio. “For our customers, Dolby Media Emulator is a bargain in itself. By bundling it with the SurCode suite without raising the price, we’ve created a one-stop shop for media producers that is truly an outstanding value.”

Dolby Media Emulator is a software tool for authoring and post that provides real-time emulation for Dolby broadcast formats. Acting as a plug-in for popular digital audio workstations, Dolby Media Emulator enables an audio engineer to simulate accurately how content will sound when played back through licensed consumer electronics.

Dolby Media Emulator lets an operator preview the results of differing metadata values when decoding Dolby Digital, Dolby Digital Plus, and HE-AAC audio formats.

One application worth highlighting: Take a look at this diagram. See all of those speakers? Consider that Dolby Surround formats are varied but most include multiple speakers and therefore multiple positions of "sound". The vast majority of consumers are listening to complex surround signals through only one or two speakers. That means, a proper mix MUST take this into account. Minnetonka's Dolby Media Emulator makes sure you get this right. CP — One application worth highlighting: Take a look at this diagram. See all of those speakers? Consider that Dolby Surround formats are varied but most include multiple speakers and therefore multiple positions of “sound”. The vast majority of consumers are listening to complex surround signals through only one or two speakers. That means, a proper mix MUST take this into account. Minnetonka’s Dolby Media Emulator makes sure you get this right. CP

“With the majority of surround programs being played back in stereo and mono environments, correct metadata and downmix settings are a critical requirement for deliverables,” said Markus Hintz, director of global sales and business development at Minnetonka Audio. “In addition to previewing their metadata settings, audio engineers can use Dolby Media Emulator for standardized loudness measurement, proper monitoring of LtRt sources, and downmixes from all other sources.”

Rather than resort to using home audio gear in a professional workflow, engineers can use Dolby Media Emulator to validate mix and metadata decisions against a certified standard in their familiar monitoring environment.

To aid in specifying proper metadata values, Dolby Media Emulator can measure and properly determine the dialogue normalization (dialnorm) value with a standardized loudness meter. The included loudness meter supports international ITU-R BS.1770, ITU-R BS.1770-2, and EBU R-128 loudness standards and incorporates the optional Dolby Dialogue Intelligence(TM) algorithm. Its ability to configure and control the monitoring environment and evaluate metadata parameters makes Dolby Media Emulator an essential product for postproduction, DVD, and DTV facilities that master, author, or broadcast program material with Dolby surround sound formats. Dolby Media Emulator runs as an Avid(R) Pro Tools(R) RTAS(R) plug-in, and as a VST(R) plug-in for popular programs such as Nuendo(R).

Dolby Media Emulator is available for immediate delivery from Minnetonka Audio resellers and distributors, and also directly from Minnetonka Audio’s eShop. In-depth information on Dolby Media Emulator and how it enriches existing tools and workflows is available at www.minnetonkaaudio.com.

Legendary soviet achievement

A remnant of the past

The Raketa “Ekranoplan” watch model is limited to 500 pieces.

The price

Specifications

“I was on a mission to figure out how to help people like myself engage with their music collections. This piece is the result of that effort,” says designer Adam Friedman.

Recently, H.S.H. Prince Albert II of Monaco visited Venturi Group’s Monegasque headquarters.

FLEX will be the largest and most advanced lunar vehicle ever made.

That limited-edition AT-SB2022 retro red Sound Burger sold out in a matter of days worldwide – faster than anyone projected.

Love at first listen, the Sound Burger is an affordable entry-level machine in terms of both features and price. For those who are new to vinyl records, it is a doorway to a deeper knowledge of analog music.

Living in space has significant effects on the human body. As we prepare for journeys to more distant destinations like Mars, humankind must tackle these risks to ensure safe travel for our astronauts.

Concrete workers are unsung heroes. Their work doesn’t end, even when winter hits and the temperature drops.

#1 They Pay Attention to the Weather Forecast

#2 They Protect Their Body

#3 They Protect Their Hands

#4 They Protect Their Feet

#5 They Protect Their Equipment

Green screen, big box

Closing the deal

Nothing like the real thing

Warm community

Inspirators

Final thoughts

Listen on Soundcloud

Kick scooter, pronounced ‘geek scooter.’

Engineer Bostjan Zagar and his father developed an open platform kick scooter, OLAF Urban, that can carry any bag or backpack.

After almost three years of research and development, Zagar was confident enough to start crowd funding at Kickstarter.

Machine Intelligence

Acquiring “Black Beauty”

First Personality Appearance

Early Life with Black Beauty

The First Time She Flew

Him in the plane, me in the 928

I never considered ever selling her and even if I had that couldn’t have happened because she went out in a fiery glory. Burned to the hubs when a hard fuel line ruptured underneath. I fucking cried. I’m not joking. Her loss was unfathomable and what else could I do but cry for her?

Life with Black Beauty

Evenings in Windermere Circle

You may not know it yet, but Serbia is an audiophile hotbed and we are doing our duty to help firmly plant the hi-fi flag in Serbian soil.

1. HomeGauge

2. Spectora

3. EZ Home Inspection Software

4. Property Inspect

5. Horizon Software

Elon Musk is one step closer to connecting a computer to your brain.

Cyber Frankensteins

Announcement Comes As Nuclear, Climate, and Tech Issues Dominate An Unsettled World Stage; Experienced World Leaders to Join Bulletin Experts on Climate and Nuclear Warfare.

The factors contributing to the decision about the Doomsday Clock time will be outlined today.

Design

Canada's 'biggest little blogspace'